YES Termination w.r.t. Q proof of Transformed_CSR_04_MYNAT_nokinds_noand_iGM.ari

Termination w.r.t. Q of the given QTRS could be proven:

0 QTRS
↳1 DependencyPairsProof (⇔, 0 ms)
↳2 QDP
↳3 DependencyGraphProof (⇔, 3 ms)
↳4 AND
    ↳5 QDP
        ↳6 UsableRulesProof (⇔, 0 ms)
        ↳7 QDP
        ↳8 QDPSizeChangeProof (⇔, 0 ms)
        ↳9 YES
    ↳10 QDP
        ↳11 UsableRulesProof (⇔, 0 ms)
        ↳12 QDP
        ↳13 QDPSizeChangeProof (⇔, 0 ms)
        ↳14 YES
    ↳15 QDP
        ↳16 UsableRulesProof (⇔, 0 ms)
        ↳17 QDP
        ↳18 QDPSizeChangeProof (⇔, 0 ms)
        ↳19 YES
    ↳20 QDP
        ↳21 UsableRulesProof (⇔, 0 ms)
        ↳22 QDP
        ↳23 QDPSizeChangeProof (⇔, 0 ms)
        ↳24 YES
    ↳25 QDP
        ↳26 UsableRulesProof (⇔, 0 ms)
        ↳27 QDP
        ↳28 QDPSizeChangeProof (⇔, 0 ms)
        ↳29 YES
    ↳30 QDP
        ↳31 UsableRulesProof (⇔, 0 ms)
        ↳32 QDP
        ↳33 QDPSizeChangeProof (⇔, 0 ms)
        ↳34 YES
    ↳35 QDP
        ↳36 UsableRulesProof (⇔, 0 ms)
        ↳37 QDP
        ↳38 QDPSizeChangeProof (⇔, 0 ms)
        ↳39 YES
    ↳40 QDP
        ↳41 UsableRulesProof (⇔, 0 ms)
        ↳42 QDP
        ↳43 QDPSizeChangeProof (⇔, 0 ms)
        ↳44 YES
    ↳45 QDP
        ↳46 UsableRulesProof (⇔, 0 ms)
        ↳47 QDP
        ↳48 QDPSizeChangeProof (⇔, 0 ms)
        ↳49 YES
    ↳50 QDP
        ↳51 UsableRulesProof (⇔, 0 ms)
        ↳52 QDP
        ↳53 QDPSizeChangeProof (⇔, 0 ms)
        ↳54 YES
    ↳55 QDP
        ↳56 UsableRulesProof (⇔, 0 ms)
        ↳57 QDP
        ↳58 QDPSizeChangeProof (⇔, 0 ms)
        ↳59 YES
    ↳60 QDP
        ↳61 UsableRulesProof (⇔, 0 ms)
        ↳62 QDP
        ↳63 QDPSizeChangeProof (⇔, 0 ms)
        ↳64 YES
    ↳65 QDP
        ↳66 UsableRulesProof (⇔, 0 ms)
        ↳67 QDP
        ↳68 QDPSizeChangeProof (⇔, 0 ms)
        ↳69 YES
    ↳70 QDP
        ↳71 UsableRulesProof (⇔, 0 ms)
        ↳72 QDP
        ↳73 QDPSizeChangeProof (⇔, 0 ms)
        ↳74 YES
    ↳75 QDP
        ↳76 UsableRulesProof (⇔, 0 ms)
        ↳77 QDP
        ↳78 QDPSizeChangeProof (⇔, 0 ms)
        ↳79 YES
    ↳80 QDP
        ↳81 QDPOrderProof (⇔, 331 ms)
        ↳82 QDP
        ↳83 QDPOrderProof (⇔, 6 ms)
        ↳84 QDP
        ↳85 QDPOrderProof (⇔, 20 ms)
        ↳86 QDP
        ↳87 QDPOrderProof (⇔, 0 ms)
        ↳88 QDP
        ↳89 QDPOrderProof (⇔, 0 ms)
        ↳90 QDP
        ↳91 QDPOrderProof (⇔, 462 ms)
        ↳92 QDP
        ↳93 QDPOrderProof (⇔, 276 ms)
        ↳94 QDP
        ↳95 QDPOrderProof (⇔, 285 ms)
        ↳96 QDP
        ↳97 QDPOrderProof (⇔, 155 ms)
        ↳98 QDP
        ↳99 QDPOrderProof (⇔, 85 ms)
        ↳100 QDP
        ↳101 QDPOrderProof (⇔, 133 ms)
        ↳102 QDP
        ↳103 QDPOrderProof (⇔, 288 ms)
        ↳104 QDP
        ↳105 QDPOrderProof (⇔, 83 ms)
        ↳106 QDP
        ↳107 QDPOrderProof (⇔, 310 ms)
        ↳108 QDP
        ↳109 QDPOrderProof (⇔, 242 ms)
        ↳110 QDP
        ↳111 QDPOrderProof (⇔, 64 ms)
        ↳112 QDP
        ↳113 QDPOrderProof (⇔, 129 ms)
        ↳114 QDP
        ↳115 QDPOrderProof (⇔, 159 ms)
        ↳116 QDP
        ↳117 QDPOrderProof (⇔, 176 ms)
        ↳118 QDP
        ↳119 QDPOrderProof (⇔, 90 ms)
        ↳120 QDP
        ↳121 UsableRulesProof (⇔, 0 ms)
        ↳122 QDP
        ↳123 UsableRulesReductionPairsProof (⇔, 2 ms)
        ↳124 QDP
        ↳125 DependencyGraphProof (⇔, 0 ms)
        ↳126 QDP
        ↳127 QDPSizeChangeProof (⇔, 0 ms)
        ↳128 YES

(0) Obligation:

Q restricted rewrite system:
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.

(1) DependencyPairsProof (EQUIVALENT transformation)

Using Dependency Pairs [AG00,LPAR04] we result in the following initial DP problem.

(2) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
ACTIVE(U11(tt, V2)) → U121(isNat(V2))
ACTIVE(U11(tt, V2)) → ISNAT(V2)
ACTIVE(U12(tt)) → MARK(tt)
ACTIVE(U21(tt)) → MARK(tt)
ACTIVE(U31(tt, V2)) → MARK(U32(isNat(V2)))
ACTIVE(U31(tt, V2)) → U321(isNat(V2))
ACTIVE(U31(tt, V2)) → ISNAT(V2)
ACTIVE(U32(tt)) → MARK(tt)
ACTIVE(U41(tt, N)) → MARK(N)
ACTIVE(U51(tt, M, N)) → MARK(U52(isNat(N), M, N))
ACTIVE(U51(tt, M, N)) → U521(isNat(N), M, N)
ACTIVE(U51(tt, M, N)) → ISNAT(N)
ACTIVE(U52(tt, M, N)) → MARK(s(plus(N, M)))
ACTIVE(U52(tt, M, N)) → S(plus(N, M))
ACTIVE(U52(tt, M, N)) → PLUS(N, M)
ACTIVE(U61(tt)) → MARK(0)
ACTIVE(U71(tt, M, N)) → MARK(U72(isNat(N), M, N))
ACTIVE(U71(tt, M, N)) → U721(isNat(N), M, N)
ACTIVE(U71(tt, M, N)) → ISNAT(N)
ACTIVE(U72(tt, M, N)) → MARK(plus(x(N, M), N))
ACTIVE(U72(tt, M, N)) → PLUS(x(N, M), N)
ACTIVE(U72(tt, M, N)) → X(N, M)
ACTIVE(isNat(0)) → MARK(tt)
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
ACTIVE(isNat(plus(V1, V2))) → U111(isNat(V1), V2)
ACTIVE(isNat(plus(V1, V2))) → ISNAT(V1)
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
ACTIVE(isNat(s(V1))) → U211(isNat(V1))
ACTIVE(isNat(s(V1))) → ISNAT(V1)
ACTIVE(isNat(x(V1, V2))) → MARK(U31(isNat(V1), V2))
ACTIVE(isNat(x(V1, V2))) → U311(isNat(V1), V2)
ACTIVE(isNat(x(V1, V2))) → ISNAT(V1)
ACTIVE(plus(N, 0)) → MARK(U41(isNat(N), N))
ACTIVE(plus(N, 0)) → U411(isNat(N), N)
ACTIVE(plus(N, 0)) → ISNAT(N)
ACTIVE(plus(N, s(M))) → MARK(U51(isNat(M), M, N))
ACTIVE(plus(N, s(M))) → U511(isNat(M), M, N)
ACTIVE(plus(N, s(M))) → ISNAT(M)
ACTIVE(x(N, 0)) → MARK(U61(isNat(N)))
ACTIVE(x(N, 0)) → U611(isNat(N))
ACTIVE(x(N, 0)) → ISNAT(N)
ACTIVE(x(N, s(M))) → MARK(U71(isNat(M), M, N))
ACTIVE(x(N, s(M))) → U711(isNat(M), M, N)
ACTIVE(x(N, s(M))) → ISNAT(M)
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
MARK(U11(X1, X2)) → U111(mark(X1), X2)
MARK(U11(X1, X2)) → MARK(X1)
MARK(tt) → ACTIVE(tt)
MARK(U12(X)) → ACTIVE(U12(mark(X)))
MARK(U12(X)) → U121(mark(X))
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(U21(X)) → U211(mark(X))
MARK(U21(X)) → MARK(X)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
MARK(U31(X1, X2)) → U311(mark(X1), X2)
MARK(U31(X1, X2)) → MARK(X1)
MARK(U32(X)) → ACTIVE(U32(mark(X)))
MARK(U32(X)) → U321(mark(X))
MARK(U32(X)) → MARK(X)
MARK(U41(X1, X2)) → ACTIVE(U41(mark(X1), X2))
MARK(U41(X1, X2)) → U411(mark(X1), X2)
MARK(U41(X1, X2)) → MARK(X1)
MARK(U51(X1, X2, X3)) → ACTIVE(U51(mark(X1), X2, X3))
MARK(U51(X1, X2, X3)) → U511(mark(X1), X2, X3)
MARK(U51(X1, X2, X3)) → MARK(X1)
MARK(U52(X1, X2, X3)) → ACTIVE(U52(mark(X1), X2, X3))
MARK(U52(X1, X2, X3)) → U521(mark(X1), X2, X3)
MARK(U52(X1, X2, X3)) → MARK(X1)
MARK(s(X)) → ACTIVE(s(mark(X)))
MARK(s(X)) → S(mark(X))
MARK(s(X)) → MARK(X)
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
MARK(plus(X1, X2)) → PLUS(mark(X1), mark(X2))
MARK(plus(X1, X2)) → MARK(X1)
MARK(plus(X1, X2)) → MARK(X2)
MARK(U61(X)) → ACTIVE(U61(mark(X)))
MARK(U61(X)) → U611(mark(X))
MARK(U61(X)) → MARK(X)
MARK(0) → ACTIVE(0)
MARK(U71(X1, X2, X3)) → ACTIVE(U71(mark(X1), X2, X3))
MARK(U71(X1, X2, X3)) → U711(mark(X1), X2, X3)
MARK(U71(X1, X2, X3)) → MARK(X1)
MARK(U72(X1, X2, X3)) → ACTIVE(U72(mark(X1), X2, X3))
MARK(U72(X1, X2, X3)) → U721(mark(X1), X2, X3)
MARK(U72(X1, X2, X3)) → MARK(X1)
MARK(x(X1, X2)) → ACTIVE(x(mark(X1), mark(X2)))
MARK(x(X1, X2)) → X(mark(X1), mark(X2))
MARK(x(X1, X2)) → MARK(X1)
MARK(x(X1, X2)) → MARK(X2)
U111(mark(X1), X2) → U111(X1, X2)
U111(X1, mark(X2)) → U111(X1, X2)
U111(active(X1), X2) → U111(X1, X2)
U111(X1, active(X2)) → U111(X1, X2)
U121(mark(X)) → U121(X)
U121(active(X)) → U121(X)
ISNAT(mark(X)) → ISNAT(X)
ISNAT(active(X)) → ISNAT(X)
U211(mark(X)) → U211(X)
U211(active(X)) → U211(X)
U311(mark(X1), X2) → U311(X1, X2)
U311(X1, mark(X2)) → U311(X1, X2)
U311(active(X1), X2) → U311(X1, X2)
U311(X1, active(X2)) → U311(X1, X2)
U321(mark(X)) → U321(X)
U321(active(X)) → U321(X)
U411(mark(X1), X2) → U411(X1, X2)
U411(X1, mark(X2)) → U411(X1, X2)
U411(active(X1), X2) → U411(X1, X2)
U411(X1, active(X2)) → U411(X1, X2)
U511(mark(X1), X2, X3) → U511(X1, X2, X3)
U511(X1, mark(X2), X3) → U511(X1, X2, X3)
U511(X1, X2, mark(X3)) → U511(X1, X2, X3)
U511(active(X1), X2, X3) → U511(X1, X2, X3)
U511(X1, active(X2), X3) → U511(X1, X2, X3)
U511(X1, X2, active(X3)) → U511(X1, X2, X3)
U521(mark(X1), X2, X3) → U521(X1, X2, X3)
U521(X1, mark(X2), X3) → U521(X1, X2, X3)
U521(X1, X2, mark(X3)) → U521(X1, X2, X3)
U521(active(X1), X2, X3) → U521(X1, X2, X3)
U521(X1, active(X2), X3) → U521(X1, X2, X3)
U521(X1, X2, active(X3)) → U521(X1, X2, X3)
S(mark(X)) → S(X)
S(active(X)) → S(X)
PLUS(mark(X1), X2) → PLUS(X1, X2)
PLUS(X1, mark(X2)) → PLUS(X1, X2)
PLUS(active(X1), X2) → PLUS(X1, X2)
PLUS(X1, active(X2)) → PLUS(X1, X2)
U611(mark(X)) → U611(X)
U611(active(X)) → U611(X)
U711(mark(X1), X2, X3) → U711(X1, X2, X3)
U711(X1, mark(X2), X3) → U711(X1, X2, X3)
U711(X1, X2, mark(X3)) → U711(X1, X2, X3)
U711(active(X1), X2, X3) → U711(X1, X2, X3)
U711(X1, active(X2), X3) → U711(X1, X2, X3)
U711(X1, X2, active(X3)) → U711(X1, X2, X3)
U721(mark(X1), X2, X3) → U721(X1, X2, X3)
U721(X1, mark(X2), X3) → U721(X1, X2, X3)
U721(X1, X2, mark(X3)) → U721(X1, X2, X3)
U721(active(X1), X2, X3) → U721(X1, X2, X3)
U721(X1, active(X2), X3) → U721(X1, X2, X3)
U721(X1, X2, active(X3)) → U721(X1, X2, X3)
X(mark(X1), X2) → X(X1, X2)
X(X1, mark(X2)) → X(X1, X2)
X(active(X1), X2) → X(X1, X2)
X(X1, active(X2)) → X(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(3) DependencyGraphProof (EQUIVALENT transformation)

The approximation of the Dependency Graph [LPAR04,FROCOS05,EDGSTAR] contains 16 SCCs with 47 less nodes.

(4) Complex Obligation (AND)

(5) Obligation:

Q DP problem:
The TRS P consists of the following rules:

X(X1, mark(X2)) → X(X1, X2)
X(mark(X1), X2) → X(X1, X2)
X(active(X1), X2) → X(X1, X2)
X(X1, active(X2)) → X(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(6) UsableRulesProof (EQUIVALENT transformation)

We can use the usable rules and reduction pair processor [LPAR04] with the Ce-compatible extension of the polynomial order that maps every function symbol to the sum of its arguments. Then, we can delete all non-usable rules [FROCOS05] from R.

(7) Obligation:

Q DP problem:
The TRS P consists of the following rules:

X(X1, mark(X2)) → X(X1, X2)
X(mark(X1), X2) → X(X1, X2)
X(active(X1), X2) → X(X1, X2)
X(X1, active(X2)) → X(X1, X2)

R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(8) QDPSizeChangeProof (EQUIVALENT transformation)

By using the subterm criterion [SUBTERM_CRITERION] together with the size-change analysis [AAECC05] we have proven that there are no infinite chains for this DP problem.

From the DPs we obtained the following set of size-change graphs:

  • X(X1, mark(X2)) → X(X1, X2)
    The graph contains the following edges 1 >= 1, 2 > 2

  • X(mark(X1), X2) → X(X1, X2)
    The graph contains the following edges 1 > 1, 2 >= 2

  • X(active(X1), X2) → X(X1, X2)
    The graph contains the following edges 1 > 1, 2 >= 2

  • X(X1, active(X2)) → X(X1, X2)
    The graph contains the following edges 1 >= 1, 2 > 2

(9) YES

(10) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U721(X1, mark(X2), X3) → U721(X1, X2, X3)
U721(mark(X1), X2, X3) → U721(X1, X2, X3)
U721(X1, X2, mark(X3)) → U721(X1, X2, X3)
U721(active(X1), X2, X3) → U721(X1, X2, X3)
U721(X1, active(X2), X3) → U721(X1, X2, X3)
U721(X1, X2, active(X3)) → U721(X1, X2, X3)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(11) UsableRulesProof (EQUIVALENT transformation)

We can use the usable rules and reduction pair processor [LPAR04] with the Ce-compatible extension of the polynomial order that maps every function symbol to the sum of its arguments. Then, we can delete all non-usable rules [FROCOS05] from R.

(12) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U721(X1, mark(X2), X3) → U721(X1, X2, X3)
U721(mark(X1), X2, X3) → U721(X1, X2, X3)
U721(X1, X2, mark(X3)) → U721(X1, X2, X3)
U721(active(X1), X2, X3) → U721(X1, X2, X3)
U721(X1, active(X2), X3) → U721(X1, X2, X3)
U721(X1, X2, active(X3)) → U721(X1, X2, X3)

R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(13) QDPSizeChangeProof (EQUIVALENT transformation)

By using the subterm criterion [SUBTERM_CRITERION] together with the size-change analysis [AAECC05] we have proven that there are no infinite chains for this DP problem.

From the DPs we obtained the following set of size-change graphs:

  • U721(X1, mark(X2), X3) → U721(X1, X2, X3)
    The graph contains the following edges 1 >= 1, 2 > 2, 3 >= 3

  • U721(mark(X1), X2, X3) → U721(X1, X2, X3)
    The graph contains the following edges 1 > 1, 2 >= 2, 3 >= 3

  • U721(X1, X2, mark(X3)) → U721(X1, X2, X3)
    The graph contains the following edges 1 >= 1, 2 >= 2, 3 > 3

  • U721(active(X1), X2, X3) → U721(X1, X2, X3)
    The graph contains the following edges 1 > 1, 2 >= 2, 3 >= 3

  • U721(X1, active(X2), X3) → U721(X1, X2, X3)
    The graph contains the following edges 1 >= 1, 2 > 2, 3 >= 3

  • U721(X1, X2, active(X3)) → U721(X1, X2, X3)
    The graph contains the following edges 1 >= 1, 2 >= 2, 3 > 3

(14) YES

(15) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U711(X1, mark(X2), X3) → U711(X1, X2, X3)
U711(mark(X1), X2, X3) → U711(X1, X2, X3)
U711(X1, X2, mark(X3)) → U711(X1, X2, X3)
U711(active(X1), X2, X3) → U711(X1, X2, X3)
U711(X1, active(X2), X3) → U711(X1, X2, X3)
U711(X1, X2, active(X3)) → U711(X1, X2, X3)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(16) UsableRulesProof (EQUIVALENT transformation)

We can use the usable rules and reduction pair processor [LPAR04] with the Ce-compatible extension of the polynomial order that maps every function symbol to the sum of its arguments. Then, we can delete all non-usable rules [FROCOS05] from R.

(17) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U711(X1, mark(X2), X3) → U711(X1, X2, X3)
U711(mark(X1), X2, X3) → U711(X1, X2, X3)
U711(X1, X2, mark(X3)) → U711(X1, X2, X3)
U711(active(X1), X2, X3) → U711(X1, X2, X3)
U711(X1, active(X2), X3) → U711(X1, X2, X3)
U711(X1, X2, active(X3)) → U711(X1, X2, X3)

R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(18) QDPSizeChangeProof (EQUIVALENT transformation)

By using the subterm criterion [SUBTERM_CRITERION] together with the size-change analysis [AAECC05] we have proven that there are no infinite chains for this DP problem.

From the DPs we obtained the following set of size-change graphs:

  • U711(X1, mark(X2), X3) → U711(X1, X2, X3)
    The graph contains the following edges 1 >= 1, 2 > 2, 3 >= 3

  • U711(mark(X1), X2, X3) → U711(X1, X2, X3)
    The graph contains the following edges 1 > 1, 2 >= 2, 3 >= 3

  • U711(X1, X2, mark(X3)) → U711(X1, X2, X3)
    The graph contains the following edges 1 >= 1, 2 >= 2, 3 > 3

  • U711(active(X1), X2, X3) → U711(X1, X2, X3)
    The graph contains the following edges 1 > 1, 2 >= 2, 3 >= 3

  • U711(X1, active(X2), X3) → U711(X1, X2, X3)
    The graph contains the following edges 1 >= 1, 2 > 2, 3 >= 3

  • U711(X1, X2, active(X3)) → U711(X1, X2, X3)
    The graph contains the following edges 1 >= 1, 2 >= 2, 3 > 3

(19) YES

(20) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U611(active(X)) → U611(X)
U611(mark(X)) → U611(X)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(21) UsableRulesProof (EQUIVALENT transformation)

We can use the usable rules and reduction pair processor [LPAR04] with the Ce-compatible extension of the polynomial order that maps every function symbol to the sum of its arguments. Then, we can delete all non-usable rules [FROCOS05] from R.

(22) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U611(active(X)) → U611(X)
U611(mark(X)) → U611(X)

R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(23) QDPSizeChangeProof (EQUIVALENT transformation)

By using the subterm criterion [SUBTERM_CRITERION] together with the size-change analysis [AAECC05] we have proven that there are no infinite chains for this DP problem.

From the DPs we obtained the following set of size-change graphs:

  • U611(active(X)) → U611(X)
    The graph contains the following edges 1 > 1

  • U611(mark(X)) → U611(X)
    The graph contains the following edges 1 > 1

(24) YES

(25) Obligation:

Q DP problem:
The TRS P consists of the following rules:

PLUS(X1, mark(X2)) → PLUS(X1, X2)
PLUS(mark(X1), X2) → PLUS(X1, X2)
PLUS(active(X1), X2) → PLUS(X1, X2)
PLUS(X1, active(X2)) → PLUS(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(26) UsableRulesProof (EQUIVALENT transformation)

We can use the usable rules and reduction pair processor [LPAR04] with the Ce-compatible extension of the polynomial order that maps every function symbol to the sum of its arguments. Then, we can delete all non-usable rules [FROCOS05] from R.

(27) Obligation:

Q DP problem:
The TRS P consists of the following rules:

PLUS(X1, mark(X2)) → PLUS(X1, X2)
PLUS(mark(X1), X2) → PLUS(X1, X2)
PLUS(active(X1), X2) → PLUS(X1, X2)
PLUS(X1, active(X2)) → PLUS(X1, X2)

R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(28) QDPSizeChangeProof (EQUIVALENT transformation)

By using the subterm criterion [SUBTERM_CRITERION] together with the size-change analysis [AAECC05] we have proven that there are no infinite chains for this DP problem.

From the DPs we obtained the following set of size-change graphs:

  • PLUS(X1, mark(X2)) → PLUS(X1, X2)
    The graph contains the following edges 1 >= 1, 2 > 2

  • PLUS(mark(X1), X2) → PLUS(X1, X2)
    The graph contains the following edges 1 > 1, 2 >= 2

  • PLUS(active(X1), X2) → PLUS(X1, X2)
    The graph contains the following edges 1 > 1, 2 >= 2

  • PLUS(X1, active(X2)) → PLUS(X1, X2)
    The graph contains the following edges 1 >= 1, 2 > 2

(29) YES

(30) Obligation:

Q DP problem:
The TRS P consists of the following rules:

S(active(X)) → S(X)
S(mark(X)) → S(X)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(31) UsableRulesProof (EQUIVALENT transformation)

We can use the usable rules and reduction pair processor [LPAR04] with the Ce-compatible extension of the polynomial order that maps every function symbol to the sum of its arguments. Then, we can delete all non-usable rules [FROCOS05] from R.

(32) Obligation:

Q DP problem:
The TRS P consists of the following rules:

S(active(X)) → S(X)
S(mark(X)) → S(X)

R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(33) QDPSizeChangeProof (EQUIVALENT transformation)

By using the subterm criterion [SUBTERM_CRITERION] together with the size-change analysis [AAECC05] we have proven that there are no infinite chains for this DP problem.

From the DPs we obtained the following set of size-change graphs:

  • S(active(X)) → S(X)
    The graph contains the following edges 1 > 1

  • S(mark(X)) → S(X)
    The graph contains the following edges 1 > 1

(34) YES

(35) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U521(X1, mark(X2), X3) → U521(X1, X2, X3)
U521(mark(X1), X2, X3) → U521(X1, X2, X3)
U521(X1, X2, mark(X3)) → U521(X1, X2, X3)
U521(active(X1), X2, X3) → U521(X1, X2, X3)
U521(X1, active(X2), X3) → U521(X1, X2, X3)
U521(X1, X2, active(X3)) → U521(X1, X2, X3)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(36) UsableRulesProof (EQUIVALENT transformation)

We can use the usable rules and reduction pair processor [LPAR04] with the Ce-compatible extension of the polynomial order that maps every function symbol to the sum of its arguments. Then, we can delete all non-usable rules [FROCOS05] from R.

(37) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U521(X1, mark(X2), X3) → U521(X1, X2, X3)
U521(mark(X1), X2, X3) → U521(X1, X2, X3)
U521(X1, X2, mark(X3)) → U521(X1, X2, X3)
U521(active(X1), X2, X3) → U521(X1, X2, X3)
U521(X1, active(X2), X3) → U521(X1, X2, X3)
U521(X1, X2, active(X3)) → U521(X1, X2, X3)

R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(38) QDPSizeChangeProof (EQUIVALENT transformation)

By using the subterm criterion [SUBTERM_CRITERION] together with the size-change analysis [AAECC05] we have proven that there are no infinite chains for this DP problem.

From the DPs we obtained the following set of size-change graphs:

  • U521(X1, mark(X2), X3) → U521(X1, X2, X3)
    The graph contains the following edges 1 >= 1, 2 > 2, 3 >= 3

  • U521(mark(X1), X2, X3) → U521(X1, X2, X3)
    The graph contains the following edges 1 > 1, 2 >= 2, 3 >= 3

  • U521(X1, X2, mark(X3)) → U521(X1, X2, X3)
    The graph contains the following edges 1 >= 1, 2 >= 2, 3 > 3

  • U521(active(X1), X2, X3) → U521(X1, X2, X3)
    The graph contains the following edges 1 > 1, 2 >= 2, 3 >= 3

  • U521(X1, active(X2), X3) → U521(X1, X2, X3)
    The graph contains the following edges 1 >= 1, 2 > 2, 3 >= 3

  • U521(X1, X2, active(X3)) → U521(X1, X2, X3)
    The graph contains the following edges 1 >= 1, 2 >= 2, 3 > 3

(39) YES

(40) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U511(X1, mark(X2), X3) → U511(X1, X2, X3)
U511(mark(X1), X2, X3) → U511(X1, X2, X3)
U511(X1, X2, mark(X3)) → U511(X1, X2, X3)
U511(active(X1), X2, X3) → U511(X1, X2, X3)
U511(X1, active(X2), X3) → U511(X1, X2, X3)
U511(X1, X2, active(X3)) → U511(X1, X2, X3)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(41) UsableRulesProof (EQUIVALENT transformation)

We can use the usable rules and reduction pair processor [LPAR04] with the Ce-compatible extension of the polynomial order that maps every function symbol to the sum of its arguments. Then, we can delete all non-usable rules [FROCOS05] from R.

(42) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U511(X1, mark(X2), X3) → U511(X1, X2, X3)
U511(mark(X1), X2, X3) → U511(X1, X2, X3)
U511(X1, X2, mark(X3)) → U511(X1, X2, X3)
U511(active(X1), X2, X3) → U511(X1, X2, X3)
U511(X1, active(X2), X3) → U511(X1, X2, X3)
U511(X1, X2, active(X3)) → U511(X1, X2, X3)

R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(43) QDPSizeChangeProof (EQUIVALENT transformation)

By using the subterm criterion [SUBTERM_CRITERION] together with the size-change analysis [AAECC05] we have proven that there are no infinite chains for this DP problem.

From the DPs we obtained the following set of size-change graphs:

  • U511(X1, mark(X2), X3) → U511(X1, X2, X3)
    The graph contains the following edges 1 >= 1, 2 > 2, 3 >= 3

  • U511(mark(X1), X2, X3) → U511(X1, X2, X3)
    The graph contains the following edges 1 > 1, 2 >= 2, 3 >= 3

  • U511(X1, X2, mark(X3)) → U511(X1, X2, X3)
    The graph contains the following edges 1 >= 1, 2 >= 2, 3 > 3

  • U511(active(X1), X2, X3) → U511(X1, X2, X3)
    The graph contains the following edges 1 > 1, 2 >= 2, 3 >= 3

  • U511(X1, active(X2), X3) → U511(X1, X2, X3)
    The graph contains the following edges 1 >= 1, 2 > 2, 3 >= 3

  • U511(X1, X2, active(X3)) → U511(X1, X2, X3)
    The graph contains the following edges 1 >= 1, 2 >= 2, 3 > 3

(44) YES

(45) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U411(X1, mark(X2)) → U411(X1, X2)
U411(mark(X1), X2) → U411(X1, X2)
U411(active(X1), X2) → U411(X1, X2)
U411(X1, active(X2)) → U411(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(46) UsableRulesProof (EQUIVALENT transformation)

We can use the usable rules and reduction pair processor [LPAR04] with the Ce-compatible extension of the polynomial order that maps every function symbol to the sum of its arguments. Then, we can delete all non-usable rules [FROCOS05] from R.

(47) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U411(X1, mark(X2)) → U411(X1, X2)
U411(mark(X1), X2) → U411(X1, X2)
U411(active(X1), X2) → U411(X1, X2)
U411(X1, active(X2)) → U411(X1, X2)

R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(48) QDPSizeChangeProof (EQUIVALENT transformation)

By using the subterm criterion [SUBTERM_CRITERION] together with the size-change analysis [AAECC05] we have proven that there are no infinite chains for this DP problem.

From the DPs we obtained the following set of size-change graphs:

  • U411(X1, mark(X2)) → U411(X1, X2)
    The graph contains the following edges 1 >= 1, 2 > 2

  • U411(mark(X1), X2) → U411(X1, X2)
    The graph contains the following edges 1 > 1, 2 >= 2

  • U411(active(X1), X2) → U411(X1, X2)
    The graph contains the following edges 1 > 1, 2 >= 2

  • U411(X1, active(X2)) → U411(X1, X2)
    The graph contains the following edges 1 >= 1, 2 > 2

(49) YES

(50) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U321(active(X)) → U321(X)
U321(mark(X)) → U321(X)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(51) UsableRulesProof (EQUIVALENT transformation)

We can use the usable rules and reduction pair processor [LPAR04] with the Ce-compatible extension of the polynomial order that maps every function symbol to the sum of its arguments. Then, we can delete all non-usable rules [FROCOS05] from R.

(52) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U321(active(X)) → U321(X)
U321(mark(X)) → U321(X)

R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(53) QDPSizeChangeProof (EQUIVALENT transformation)

By using the subterm criterion [SUBTERM_CRITERION] together with the size-change analysis [AAECC05] we have proven that there are no infinite chains for this DP problem.

From the DPs we obtained the following set of size-change graphs:

  • U321(active(X)) → U321(X)
    The graph contains the following edges 1 > 1

  • U321(mark(X)) → U321(X)
    The graph contains the following edges 1 > 1

(54) YES

(55) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U311(X1, mark(X2)) → U311(X1, X2)
U311(mark(X1), X2) → U311(X1, X2)
U311(active(X1), X2) → U311(X1, X2)
U311(X1, active(X2)) → U311(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(56) UsableRulesProof (EQUIVALENT transformation)

We can use the usable rules and reduction pair processor [LPAR04] with the Ce-compatible extension of the polynomial order that maps every function symbol to the sum of its arguments. Then, we can delete all non-usable rules [FROCOS05] from R.

(57) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U311(X1, mark(X2)) → U311(X1, X2)
U311(mark(X1), X2) → U311(X1, X2)
U311(active(X1), X2) → U311(X1, X2)
U311(X1, active(X2)) → U311(X1, X2)

R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(58) QDPSizeChangeProof (EQUIVALENT transformation)

By using the subterm criterion [SUBTERM_CRITERION] together with the size-change analysis [AAECC05] we have proven that there are no infinite chains for this DP problem.

From the DPs we obtained the following set of size-change graphs:

  • U311(X1, mark(X2)) → U311(X1, X2)
    The graph contains the following edges 1 >= 1, 2 > 2

  • U311(mark(X1), X2) → U311(X1, X2)
    The graph contains the following edges 1 > 1, 2 >= 2

  • U311(active(X1), X2) → U311(X1, X2)
    The graph contains the following edges 1 > 1, 2 >= 2

  • U311(X1, active(X2)) → U311(X1, X2)
    The graph contains the following edges 1 >= 1, 2 > 2

(59) YES

(60) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U211(active(X)) → U211(X)
U211(mark(X)) → U211(X)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(61) UsableRulesProof (EQUIVALENT transformation)

We can use the usable rules and reduction pair processor [LPAR04] with the Ce-compatible extension of the polynomial order that maps every function symbol to the sum of its arguments. Then, we can delete all non-usable rules [FROCOS05] from R.

(62) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U211(active(X)) → U211(X)
U211(mark(X)) → U211(X)

R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(63) QDPSizeChangeProof (EQUIVALENT transformation)

By using the subterm criterion [SUBTERM_CRITERION] together with the size-change analysis [AAECC05] we have proven that there are no infinite chains for this DP problem.

From the DPs we obtained the following set of size-change graphs:

  • U211(active(X)) → U211(X)
    The graph contains the following edges 1 > 1

  • U211(mark(X)) → U211(X)
    The graph contains the following edges 1 > 1

(64) YES

(65) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ISNAT(active(X)) → ISNAT(X)
ISNAT(mark(X)) → ISNAT(X)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(66) UsableRulesProof (EQUIVALENT transformation)

We can use the usable rules and reduction pair processor [LPAR04] with the Ce-compatible extension of the polynomial order that maps every function symbol to the sum of its arguments. Then, we can delete all non-usable rules [FROCOS05] from R.

(67) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ISNAT(active(X)) → ISNAT(X)
ISNAT(mark(X)) → ISNAT(X)

R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(68) QDPSizeChangeProof (EQUIVALENT transformation)

By using the subterm criterion [SUBTERM_CRITERION] together with the size-change analysis [AAECC05] we have proven that there are no infinite chains for this DP problem.

From the DPs we obtained the following set of size-change graphs:

  • ISNAT(active(X)) → ISNAT(X)
    The graph contains the following edges 1 > 1

  • ISNAT(mark(X)) → ISNAT(X)
    The graph contains the following edges 1 > 1

(69) YES

(70) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U121(active(X)) → U121(X)
U121(mark(X)) → U121(X)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(71) UsableRulesProof (EQUIVALENT transformation)

We can use the usable rules and reduction pair processor [LPAR04] with the Ce-compatible extension of the polynomial order that maps every function symbol to the sum of its arguments. Then, we can delete all non-usable rules [FROCOS05] from R.

(72) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U121(active(X)) → U121(X)
U121(mark(X)) → U121(X)

R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(73) QDPSizeChangeProof (EQUIVALENT transformation)

By using the subterm criterion [SUBTERM_CRITERION] together with the size-change analysis [AAECC05] we have proven that there are no infinite chains for this DP problem.

From the DPs we obtained the following set of size-change graphs:

  • U121(active(X)) → U121(X)
    The graph contains the following edges 1 > 1

  • U121(mark(X)) → U121(X)
    The graph contains the following edges 1 > 1

(74) YES

(75) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U111(X1, mark(X2)) → U111(X1, X2)
U111(mark(X1), X2) → U111(X1, X2)
U111(active(X1), X2) → U111(X1, X2)
U111(X1, active(X2)) → U111(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(76) UsableRulesProof (EQUIVALENT transformation)

We can use the usable rules and reduction pair processor [LPAR04] with the Ce-compatible extension of the polynomial order that maps every function symbol to the sum of its arguments. Then, we can delete all non-usable rules [FROCOS05] from R.

(77) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U111(X1, mark(X2)) → U111(X1, X2)
U111(mark(X1), X2) → U111(X1, X2)
U111(active(X1), X2) → U111(X1, X2)
U111(X1, active(X2)) → U111(X1, X2)

R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(78) QDPSizeChangeProof (EQUIVALENT transformation)

By using the subterm criterion [SUBTERM_CRITERION] together with the size-change analysis [AAECC05] we have proven that there are no infinite chains for this DP problem.

From the DPs we obtained the following set of size-change graphs:

  • U111(X1, mark(X2)) → U111(X1, X2)
    The graph contains the following edges 1 >= 1, 2 > 2

  • U111(mark(X1), X2) → U111(X1, X2)
    The graph contains the following edges 1 > 1, 2 >= 2

  • U111(active(X1), X2) → U111(X1, X2)
    The graph contains the following edges 1 > 1, 2 >= 2

  • U111(X1, active(X2)) → U111(X1, X2)
    The graph contains the following edges 1 >= 1, 2 > 2

(79) YES

(80) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(U12(X)) → ACTIVE(U12(mark(X)))
ACTIVE(U31(tt, V2)) → MARK(U32(isNat(V2)))
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U41(tt, N)) → MARK(N)
MARK(U21(X)) → ACTIVE(U21(mark(X)))
ACTIVE(U51(tt, M, N)) → MARK(U52(isNat(N), M, N))
MARK(U21(X)) → MARK(X)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
ACTIVE(U52(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U31(X1, X2)) → MARK(X1)
MARK(U32(X)) → ACTIVE(U32(mark(X)))
ACTIVE(U71(tt, M, N)) → MARK(U72(isNat(N), M, N))
MARK(U32(X)) → MARK(X)
MARK(U41(X1, X2)) → ACTIVE(U41(mark(X1), X2))
ACTIVE(U72(tt, M, N)) → MARK(plus(x(N, M), N))
MARK(U41(X1, X2)) → MARK(X1)
MARK(U51(X1, X2, X3)) → ACTIVE(U51(mark(X1), X2, X3))
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U51(X1, X2, X3)) → MARK(X1)
MARK(U52(X1, X2, X3)) → ACTIVE(U52(mark(X1), X2, X3))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
MARK(U52(X1, X2, X3)) → MARK(X1)
MARK(s(X)) → ACTIVE(s(mark(X)))
ACTIVE(isNat(x(V1, V2))) → MARK(U31(isNat(V1), V2))
MARK(s(X)) → MARK(X)
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
ACTIVE(plus(N, 0)) → MARK(U41(isNat(N), N))
MARK(plus(X1, X2)) → MARK(X1)
MARK(plus(X1, X2)) → MARK(X2)
MARK(U61(X)) → ACTIVE(U61(mark(X)))
ACTIVE(plus(N, s(M))) → MARK(U51(isNat(M), M, N))
MARK(U61(X)) → MARK(X)
MARK(U71(X1, X2, X3)) → ACTIVE(U71(mark(X1), X2, X3))
ACTIVE(x(N, 0)) → MARK(U61(isNat(N)))
MARK(U71(X1, X2, X3)) → MARK(X1)
MARK(U72(X1, X2, X3)) → ACTIVE(U72(mark(X1), X2, X3))
ACTIVE(x(N, s(M))) → MARK(U71(isNat(M), M, N))
MARK(U72(X1, X2, X3)) → MARK(X1)
MARK(x(X1, X2)) → ACTIVE(x(mark(X1), mark(X2)))
MARK(x(X1, X2)) → MARK(X1)
MARK(x(X1, X2)) → MARK(X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(81) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04,JAR06].


The following pairs can be oriented strictly and are deleted.


MARK(U61(X)) → ACTIVE(U61(mark(X)))
The remaining pairs can at least be oriented weakly.
Used ordering: Polynomial Order [NEGPOLO,POLO] with Interpretation:
POL( ACTIVE(x1) ) = 2x1

POL( U11(x1, x2) ) = 1

POL( U12(x1) ) = 1

POL( U21(x1) ) = 1

POL( U31(x1, x2) ) = 1

POL( U32(x1) ) = 1

POL( U41(x1, x2) ) = 1

POL( U51(x1, ..., x3) ) = 1

POL( U52(x1, ..., x3) ) = 1

POL( U61(x1) ) = max{0, -2}

POL( U71(x1, ..., x3) ) = 1

POL( U72(x1, ..., x3) ) = 1

POL( plus(x1, x2) ) = 1

POL( s(x1) ) = 1

POL( x(x1, x2) ) = 1

POL( mark(x1) ) = x1

POL( active(x1) ) = x1 + 1

POL( tt ) = 1

POL( isNat(x1) ) = 1

POL( 0 ) = 1

POL( MARK(x1) ) = 2


The following usable rules [FROCOS05] with respect to the argument filtering of the ordering [JAR06] were oriented:

U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U12(active(X)) → U12(X)
U12(mark(X)) → U12(X)
U32(active(X)) → U32(X)
U32(mark(X)) → U32(X)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
U31(X1, mark(X2)) → U31(X1, X2)
U31(mark(X1), X2) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(mark(X1), X2) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
s(active(X)) → s(X)
s(mark(X)) → s(X)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
U41(X1, mark(X2)) → U41(X1, X2)
U41(mark(X1), X2) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(mark(X1), X2) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U61(active(X)) → U61(X)
U61(mark(X)) → U61(X)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)

(82) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(U12(X)) → ACTIVE(U12(mark(X)))
ACTIVE(U31(tt, V2)) → MARK(U32(isNat(V2)))
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U41(tt, N)) → MARK(N)
MARK(U21(X)) → ACTIVE(U21(mark(X)))
ACTIVE(U51(tt, M, N)) → MARK(U52(isNat(N), M, N))
MARK(U21(X)) → MARK(X)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
ACTIVE(U52(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U31(X1, X2)) → MARK(X1)
MARK(U32(X)) → ACTIVE(U32(mark(X)))
ACTIVE(U71(tt, M, N)) → MARK(U72(isNat(N), M, N))
MARK(U32(X)) → MARK(X)
MARK(U41(X1, X2)) → ACTIVE(U41(mark(X1), X2))
ACTIVE(U72(tt, M, N)) → MARK(plus(x(N, M), N))
MARK(U41(X1, X2)) → MARK(X1)
MARK(U51(X1, X2, X3)) → ACTIVE(U51(mark(X1), X2, X3))
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U51(X1, X2, X3)) → MARK(X1)
MARK(U52(X1, X2, X3)) → ACTIVE(U52(mark(X1), X2, X3))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
MARK(U52(X1, X2, X3)) → MARK(X1)
MARK(s(X)) → ACTIVE(s(mark(X)))
ACTIVE(isNat(x(V1, V2))) → MARK(U31(isNat(V1), V2))
MARK(s(X)) → MARK(X)
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
ACTIVE(plus(N, 0)) → MARK(U41(isNat(N), N))
MARK(plus(X1, X2)) → MARK(X1)
MARK(plus(X1, X2)) → MARK(X2)
ACTIVE(plus(N, s(M))) → MARK(U51(isNat(M), M, N))
MARK(U61(X)) → MARK(X)
MARK(U71(X1, X2, X3)) → ACTIVE(U71(mark(X1), X2, X3))
ACTIVE(x(N, 0)) → MARK(U61(isNat(N)))
MARK(U71(X1, X2, X3)) → MARK(X1)
MARK(U72(X1, X2, X3)) → ACTIVE(U72(mark(X1), X2, X3))
ACTIVE(x(N, s(M))) → MARK(U71(isNat(M), M, N))
MARK(U72(X1, X2, X3)) → MARK(X1)
MARK(x(X1, X2)) → ACTIVE(x(mark(X1), mark(X2)))
MARK(x(X1, X2)) → MARK(X1)
MARK(x(X1, X2)) → MARK(X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(83) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04,JAR06].


The following pairs can be oriented strictly and are deleted.


MARK(s(X)) → ACTIVE(s(mark(X)))
The remaining pairs can at least be oriented weakly.
Used ordering: Polynomial interpretation [POLO]:

POL(0) = 0   
POL(ACTIVE(x1)) = x1   
POL(MARK(x1)) = 1   
POL(U11(x1, x2)) = 1   
POL(U12(x1)) = 1   
POL(U21(x1)) = 1   
POL(U31(x1, x2)) = 1   
POL(U32(x1)) = 1   
POL(U41(x1, x2)) = 1   
POL(U51(x1, x2, x3)) = 1   
POL(U52(x1, x2, x3)) = 1   
POL(U61(x1)) = 0   
POL(U71(x1, x2, x3)) = 1   
POL(U72(x1, x2, x3)) = 1   
POL(active(x1)) = 0   
POL(isNat(x1)) = 1   
POL(mark(x1)) = 0   
POL(plus(x1, x2)) = 1   
POL(s(x1)) = 0   
POL(tt) = 0   
POL(x(x1, x2)) = 1   

The following usable rules [FROCOS05] with respect to the argument filtering of the ordering [JAR06] were oriented:

U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U12(active(X)) → U12(X)
U12(mark(X)) → U12(X)
U32(active(X)) → U32(X)
U32(mark(X)) → U32(X)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
U31(X1, mark(X2)) → U31(X1, X2)
U31(mark(X1), X2) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(mark(X1), X2) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
s(active(X)) → s(X)
s(mark(X)) → s(X)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
U41(X1, mark(X2)) → U41(X1, X2)
U41(mark(X1), X2) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(mark(X1), X2) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)

(84) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(U12(X)) → ACTIVE(U12(mark(X)))
ACTIVE(U31(tt, V2)) → MARK(U32(isNat(V2)))
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U41(tt, N)) → MARK(N)
MARK(U21(X)) → ACTIVE(U21(mark(X)))
ACTIVE(U51(tt, M, N)) → MARK(U52(isNat(N), M, N))
MARK(U21(X)) → MARK(X)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
ACTIVE(U52(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U31(X1, X2)) → MARK(X1)
MARK(U32(X)) → ACTIVE(U32(mark(X)))
ACTIVE(U71(tt, M, N)) → MARK(U72(isNat(N), M, N))
MARK(U32(X)) → MARK(X)
MARK(U41(X1, X2)) → ACTIVE(U41(mark(X1), X2))
ACTIVE(U72(tt, M, N)) → MARK(plus(x(N, M), N))
MARK(U41(X1, X2)) → MARK(X1)
MARK(U51(X1, X2, X3)) → ACTIVE(U51(mark(X1), X2, X3))
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U51(X1, X2, X3)) → MARK(X1)
MARK(U52(X1, X2, X3)) → ACTIVE(U52(mark(X1), X2, X3))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
MARK(U52(X1, X2, X3)) → MARK(X1)
ACTIVE(isNat(x(V1, V2))) → MARK(U31(isNat(V1), V2))
MARK(s(X)) → MARK(X)
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
ACTIVE(plus(N, 0)) → MARK(U41(isNat(N), N))
MARK(plus(X1, X2)) → MARK(X1)
MARK(plus(X1, X2)) → MARK(X2)
ACTIVE(plus(N, s(M))) → MARK(U51(isNat(M), M, N))
MARK(U61(X)) → MARK(X)
MARK(U71(X1, X2, X3)) → ACTIVE(U71(mark(X1), X2, X3))
ACTIVE(x(N, 0)) → MARK(U61(isNat(N)))
MARK(U71(X1, X2, X3)) → MARK(X1)
MARK(U72(X1, X2, X3)) → ACTIVE(U72(mark(X1), X2, X3))
ACTIVE(x(N, s(M))) → MARK(U71(isNat(M), M, N))
MARK(U72(X1, X2, X3)) → MARK(X1)
MARK(x(X1, X2)) → ACTIVE(x(mark(X1), mark(X2)))
MARK(x(X1, X2)) → MARK(X1)
MARK(x(X1, X2)) → MARK(X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(85) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04,JAR06].


The following pairs can be oriented strictly and are deleted.


MARK(U32(X)) → ACTIVE(U32(mark(X)))
The remaining pairs can at least be oriented weakly.
Used ordering: Polynomial interpretation [POLO]:

POL(0) = 0   
POL(ACTIVE(x1)) = x1   
POL(MARK(x1)) = 1   
POL(U11(x1, x2)) = 1   
POL(U12(x1)) = 1   
POL(U21(x1)) = 1   
POL(U31(x1, x2)) = 1   
POL(U32(x1)) = 0   
POL(U41(x1, x2)) = 1   
POL(U51(x1, x2, x3)) = 1   
POL(U52(x1, x2, x3)) = 1   
POL(U61(x1)) = 0   
POL(U71(x1, x2, x3)) = 1   
POL(U72(x1, x2, x3)) = 1   
POL(active(x1)) = 0   
POL(isNat(x1)) = 1   
POL(mark(x1)) = 0   
POL(plus(x1, x2)) = 1   
POL(s(x1)) = 1   
POL(tt) = 0   
POL(x(x1, x2)) = 1   

The following usable rules [FROCOS05] with respect to the argument filtering of the ordering [JAR06] were oriented:

U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U12(active(X)) → U12(X)
U12(mark(X)) → U12(X)
U32(active(X)) → U32(X)
U32(mark(X)) → U32(X)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
U31(X1, mark(X2)) → U31(X1, X2)
U31(mark(X1), X2) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(mark(X1), X2) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
U41(X1, mark(X2)) → U41(X1, X2)
U41(mark(X1), X2) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(mark(X1), X2) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)

(86) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(U12(X)) → ACTIVE(U12(mark(X)))
ACTIVE(U31(tt, V2)) → MARK(U32(isNat(V2)))
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U41(tt, N)) → MARK(N)
MARK(U21(X)) → ACTIVE(U21(mark(X)))
ACTIVE(U51(tt, M, N)) → MARK(U52(isNat(N), M, N))
MARK(U21(X)) → MARK(X)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
ACTIVE(U52(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U31(X1, X2)) → MARK(X1)
ACTIVE(U71(tt, M, N)) → MARK(U72(isNat(N), M, N))
MARK(U32(X)) → MARK(X)
MARK(U41(X1, X2)) → ACTIVE(U41(mark(X1), X2))
ACTIVE(U72(tt, M, N)) → MARK(plus(x(N, M), N))
MARK(U41(X1, X2)) → MARK(X1)
MARK(U51(X1, X2, X3)) → ACTIVE(U51(mark(X1), X2, X3))
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U51(X1, X2, X3)) → MARK(X1)
MARK(U52(X1, X2, X3)) → ACTIVE(U52(mark(X1), X2, X3))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
MARK(U52(X1, X2, X3)) → MARK(X1)
ACTIVE(isNat(x(V1, V2))) → MARK(U31(isNat(V1), V2))
MARK(s(X)) → MARK(X)
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
ACTIVE(plus(N, 0)) → MARK(U41(isNat(N), N))
MARK(plus(X1, X2)) → MARK(X1)
MARK(plus(X1, X2)) → MARK(X2)
ACTIVE(plus(N, s(M))) → MARK(U51(isNat(M), M, N))
MARK(U61(X)) → MARK(X)
MARK(U71(X1, X2, X3)) → ACTIVE(U71(mark(X1), X2, X3))
ACTIVE(x(N, 0)) → MARK(U61(isNat(N)))
MARK(U71(X1, X2, X3)) → MARK(X1)
MARK(U72(X1, X2, X3)) → ACTIVE(U72(mark(X1), X2, X3))
ACTIVE(x(N, s(M))) → MARK(U71(isNat(M), M, N))
MARK(U72(X1, X2, X3)) → MARK(X1)
MARK(x(X1, X2)) → ACTIVE(x(mark(X1), mark(X2)))
MARK(x(X1, X2)) → MARK(X1)
MARK(x(X1, X2)) → MARK(X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(87) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04,JAR06].


The following pairs can be oriented strictly and are deleted.


MARK(U21(X)) → ACTIVE(U21(mark(X)))
The remaining pairs can at least be oriented weakly.
Used ordering: Polynomial interpretation [POLO]:

POL(0) = 0   
POL(ACTIVE(x1)) = x1   
POL(MARK(x1)) = 1   
POL(U11(x1, x2)) = 1   
POL(U12(x1)) = 1   
POL(U21(x1)) = 0   
POL(U31(x1, x2)) = 1   
POL(U32(x1)) = 0   
POL(U41(x1, x2)) = 1   
POL(U51(x1, x2, x3)) = 1   
POL(U52(x1, x2, x3)) = 1   
POL(U61(x1)) = 0   
POL(U71(x1, x2, x3)) = 1   
POL(U72(x1, x2, x3)) = 1   
POL(active(x1)) = 0   
POL(isNat(x1)) = 1   
POL(mark(x1)) = 0   
POL(plus(x1, x2)) = 1   
POL(s(x1)) = 1   
POL(tt) = 0   
POL(x(x1, x2)) = 1   

The following usable rules [FROCOS05] with respect to the argument filtering of the ordering [JAR06] were oriented:

U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U12(active(X)) → U12(X)
U12(mark(X)) → U12(X)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
U31(X1, mark(X2)) → U31(X1, X2)
U31(mark(X1), X2) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(mark(X1), X2) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
U41(X1, mark(X2)) → U41(X1, X2)
U41(mark(X1), X2) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(mark(X1), X2) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)

(88) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(U12(X)) → ACTIVE(U12(mark(X)))
ACTIVE(U31(tt, V2)) → MARK(U32(isNat(V2)))
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U41(tt, N)) → MARK(N)
ACTIVE(U51(tt, M, N)) → MARK(U52(isNat(N), M, N))
MARK(U21(X)) → MARK(X)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
ACTIVE(U52(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U31(X1, X2)) → MARK(X1)
ACTIVE(U71(tt, M, N)) → MARK(U72(isNat(N), M, N))
MARK(U32(X)) → MARK(X)
MARK(U41(X1, X2)) → ACTIVE(U41(mark(X1), X2))
ACTIVE(U72(tt, M, N)) → MARK(plus(x(N, M), N))
MARK(U41(X1, X2)) → MARK(X1)
MARK(U51(X1, X2, X3)) → ACTIVE(U51(mark(X1), X2, X3))
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U51(X1, X2, X3)) → MARK(X1)
MARK(U52(X1, X2, X3)) → ACTIVE(U52(mark(X1), X2, X3))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
MARK(U52(X1, X2, X3)) → MARK(X1)
ACTIVE(isNat(x(V1, V2))) → MARK(U31(isNat(V1), V2))
MARK(s(X)) → MARK(X)
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
ACTIVE(plus(N, 0)) → MARK(U41(isNat(N), N))
MARK(plus(X1, X2)) → MARK(X1)
MARK(plus(X1, X2)) → MARK(X2)
ACTIVE(plus(N, s(M))) → MARK(U51(isNat(M), M, N))
MARK(U61(X)) → MARK(X)
MARK(U71(X1, X2, X3)) → ACTIVE(U71(mark(X1), X2, X3))
ACTIVE(x(N, 0)) → MARK(U61(isNat(N)))
MARK(U71(X1, X2, X3)) → MARK(X1)
MARK(U72(X1, X2, X3)) → ACTIVE(U72(mark(X1), X2, X3))
ACTIVE(x(N, s(M))) → MARK(U71(isNat(M), M, N))
MARK(U72(X1, X2, X3)) → MARK(X1)
MARK(x(X1, X2)) → ACTIVE(x(mark(X1), mark(X2)))
MARK(x(X1, X2)) → MARK(X1)
MARK(x(X1, X2)) → MARK(X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(89) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04,JAR06].


The following pairs can be oriented strictly and are deleted.


MARK(U12(X)) → ACTIVE(U12(mark(X)))
The remaining pairs can at least be oriented weakly.
Used ordering: Polynomial interpretation [POLO]:

POL(0) = 0   
POL(ACTIVE(x1)) = x1   
POL(MARK(x1)) = 1   
POL(U11(x1, x2)) = 1   
POL(U12(x1)) = 0   
POL(U21(x1)) = 0   
POL(U31(x1, x2)) = 1   
POL(U32(x1)) = 0   
POL(U41(x1, x2)) = 1   
POL(U51(x1, x2, x3)) = 1   
POL(U52(x1, x2, x3)) = 1   
POL(U61(x1)) = 0   
POL(U71(x1, x2, x3)) = 1   
POL(U72(x1, x2, x3)) = 1   
POL(active(x1)) = 0   
POL(isNat(x1)) = 1   
POL(mark(x1)) = 0   
POL(plus(x1, x2)) = 1   
POL(s(x1)) = 1   
POL(tt) = 0   
POL(x(x1, x2)) = 1   

The following usable rules [FROCOS05] with respect to the argument filtering of the ordering [JAR06] were oriented:

U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U12(active(X)) → U12(X)
U12(mark(X)) → U12(X)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
U31(X1, mark(X2)) → U31(X1, X2)
U31(mark(X1), X2) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(mark(X1), X2) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
U41(X1, mark(X2)) → U41(X1, X2)
U41(mark(X1), X2) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(mark(X1), X2) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)

(90) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
ACTIVE(U31(tt, V2)) → MARK(U32(isNat(V2)))
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U41(tt, N)) → MARK(N)
ACTIVE(U51(tt, M, N)) → MARK(U52(isNat(N), M, N))
MARK(U21(X)) → MARK(X)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
ACTIVE(U52(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U31(X1, X2)) → MARK(X1)
ACTIVE(U71(tt, M, N)) → MARK(U72(isNat(N), M, N))
MARK(U32(X)) → MARK(X)
MARK(U41(X1, X2)) → ACTIVE(U41(mark(X1), X2))
ACTIVE(U72(tt, M, N)) → MARK(plus(x(N, M), N))
MARK(U41(X1, X2)) → MARK(X1)
MARK(U51(X1, X2, X3)) → ACTIVE(U51(mark(X1), X2, X3))
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U51(X1, X2, X3)) → MARK(X1)
MARK(U52(X1, X2, X3)) → ACTIVE(U52(mark(X1), X2, X3))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
MARK(U52(X1, X2, X3)) → MARK(X1)
ACTIVE(isNat(x(V1, V2))) → MARK(U31(isNat(V1), V2))
MARK(s(X)) → MARK(X)
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
ACTIVE(plus(N, 0)) → MARK(U41(isNat(N), N))
MARK(plus(X1, X2)) → MARK(X1)
MARK(plus(X1, X2)) → MARK(X2)
ACTIVE(plus(N, s(M))) → MARK(U51(isNat(M), M, N))
MARK(U61(X)) → MARK(X)
MARK(U71(X1, X2, X3)) → ACTIVE(U71(mark(X1), X2, X3))
ACTIVE(x(N, 0)) → MARK(U61(isNat(N)))
MARK(U71(X1, X2, X3)) → MARK(X1)
MARK(U72(X1, X2, X3)) → ACTIVE(U72(mark(X1), X2, X3))
ACTIVE(x(N, s(M))) → MARK(U71(isNat(M), M, N))
MARK(U72(X1, X2, X3)) → MARK(X1)
MARK(x(X1, X2)) → ACTIVE(x(mark(X1), mark(X2)))
MARK(x(X1, X2)) → MARK(X1)
MARK(x(X1, X2)) → MARK(X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(91) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04,JAR06].


The following pairs can be oriented strictly and are deleted.


ACTIVE(U41(tt, N)) → MARK(N)
ACTIVE(U52(tt, M, N)) → MARK(s(plus(N, M)))
ACTIVE(U72(tt, M, N)) → MARK(plus(x(N, M), N))
MARK(U41(X1, X2)) → MARK(X1)
MARK(U51(X1, X2, X3)) → MARK(X1)
MARK(U52(X1, X2, X3)) → MARK(X1)
MARK(s(X)) → MARK(X)
ACTIVE(plus(N, 0)) → MARK(U41(isNat(N), N))
MARK(plus(X1, X2)) → MARK(X1)
MARK(plus(X1, X2)) → MARK(X2)
ACTIVE(plus(N, s(M))) → MARK(U51(isNat(M), M, N))
MARK(U61(X)) → MARK(X)
ACTIVE(x(N, 0)) → MARK(U61(isNat(N)))
MARK(U71(X1, X2, X3)) → MARK(X1)
ACTIVE(x(N, s(M))) → MARK(U71(isNat(M), M, N))
MARK(U72(X1, X2, X3)) → MARK(X1)
MARK(x(X1, X2)) → MARK(X1)
MARK(x(X1, X2)) → MARK(X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
MARK(x1)  =  MARK(x1)
U11(x1, x2)  =  x1
ACTIVE(x1)  =  ACTIVE(x1)
mark(x1)  =  x1
tt  =  tt
U12(x1)  =  x1
isNat(x1)  =  isNat
U31(x1, x2)  =  x1
U32(x1)  =  x1
U41(x1, x2)  =  U41(x1, x2)
U51(x1, x2, x3)  =  U51(x1, x2, x3)
U52(x1, x2, x3)  =  U52(x1, x2, x3)
U21(x1)  =  x1
s(x1)  =  s(x1)
plus(x1, x2)  =  plus(x1, x2)
U71(x1, x2, x3)  =  U71(x1, x2, x3)
U72(x1, x2, x3)  =  U72(x1, x2, x3)
x(x1, x2)  =  x(x1, x2)
0  =  0
U61(x1)  =  U61(x1)
active(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[U713, U723, x2, U611] > [tt, isNat, U513, U523, plus2, 0] > U412 > [MARK1, ACTIVE1] > s1

Status:
MARK1: multiset
ACTIVE1: multiset
tt: multiset
isNat: []
U412: multiset
U513: [3,2,1]
U523: [3,2,1]
s1: multiset
plus2: [1,2]
U713: [2,3,1]
U723: [2,3,1]
x2: [2,1]
0: multiset
U611: [1]


The following usable rules [FROCOS05] with respect to the argument filtering of the ordering [JAR06] were oriented:

mark(U11(X1, X2)) → active(U11(mark(X1), X2))
active(U11(tt, V2)) → mark(U12(isNat(V2)))
mark(U12(X)) → active(U12(mark(X)))
active(U31(tt, V2)) → mark(U32(isNat(V2)))
mark(isNat(X)) → active(isNat(X))
active(U41(tt, N)) → mark(N)
mark(U21(X)) → active(U21(mark(X)))
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
mark(U32(X)) → active(U32(mark(X)))
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
mark(s(X)) → active(s(mark(X)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
active(plus(N, 0)) → mark(U41(isNat(N), N))
mark(U61(X)) → active(U61(mark(X)))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
active(x(N, 0)) → mark(U61(isNat(N)))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
mark(tt) → active(tt)
mark(0) → active(0)
U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U12(active(X)) → U12(X)
U12(mark(X)) → U12(X)
U32(active(X)) → U32(X)
U32(mark(X)) → U32(X)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
U31(X1, mark(X2)) → U31(X1, X2)
U31(mark(X1), X2) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(mark(X1), X2) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
s(active(X)) → s(X)
s(mark(X)) → s(X)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
U41(X1, mark(X2)) → U41(X1, X2)
U41(mark(X1), X2) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(mark(X1), X2) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U61(active(X)) → U61(X)
U61(mark(X)) → U61(X)
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U32(tt)) → mark(tt)
active(U61(tt)) → mark(0)
active(isNat(0)) → mark(tt)

(92) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
ACTIVE(U31(tt, V2)) → MARK(U32(isNat(V2)))
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U51(tt, M, N)) → MARK(U52(isNat(N), M, N))
MARK(U21(X)) → MARK(X)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
MARK(U31(X1, X2)) → MARK(X1)
ACTIVE(U71(tt, M, N)) → MARK(U72(isNat(N), M, N))
MARK(U32(X)) → MARK(X)
MARK(U41(X1, X2)) → ACTIVE(U41(mark(X1), X2))
MARK(U51(X1, X2, X3)) → ACTIVE(U51(mark(X1), X2, X3))
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U52(X1, X2, X3)) → ACTIVE(U52(mark(X1), X2, X3))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
ACTIVE(isNat(x(V1, V2))) → MARK(U31(isNat(V1), V2))
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
MARK(U71(X1, X2, X3)) → ACTIVE(U71(mark(X1), X2, X3))
MARK(U72(X1, X2, X3)) → ACTIVE(U72(mark(X1), X2, X3))
MARK(x(X1, X2)) → ACTIVE(x(mark(X1), mark(X2)))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(93) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04,JAR06].


The following pairs can be oriented strictly and are deleted.


MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
MARK(U71(X1, X2, X3)) → ACTIVE(U71(mark(X1), X2, X3))
The remaining pairs can at least be oriented weakly.
Used ordering: Polynomial Order [NEGPOLO,POLO] with Interpretation:
POL( ACTIVE(x1) ) = 1

POL( U11(x1, x2) ) = 2x1

POL( U31(x1, x2) ) = 2x1

POL( U41(x1, x2) ) = max{0, -2}

POL( U51(x1, ..., x3) ) = max{0, -2}

POL( U52(x1, ..., x3) ) = max{0, -2}

POL( U71(x1, ..., x3) ) = 2

POL( U72(x1, ..., x3) ) = max{0, -2}

POL( plus(x1, x2) ) = x1 + 2

POL( x(x1, x2) ) = max{0, -1}

POL( mark(x1) ) = x1 + 1

POL( active(x1) ) = x1 + 2

POL( tt ) = 0

POL( U12(x1) ) = x1

POL( isNat(x1) ) = 0

POL( U32(x1) ) = 2x1

POL( U21(x1) ) = 2x1

POL( s(x1) ) = 0

POL( 0 ) = 2

POL( U61(x1) ) = 2x1 + 2

POL( MARK(x1) ) = 2x1 + 1


The following usable rules [FROCOS05] with respect to the argument filtering of the ordering [JAR06] were oriented:

U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U12(active(X)) → U12(X)
U12(mark(X)) → U12(X)
U32(active(X)) → U32(X)
U32(mark(X)) → U32(X)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
U31(X1, mark(X2)) → U31(X1, X2)
U31(mark(X1), X2) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)

(94) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
ACTIVE(U31(tt, V2)) → MARK(U32(isNat(V2)))
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U51(tt, M, N)) → MARK(U52(isNat(N), M, N))
MARK(U21(X)) → MARK(X)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
MARK(U31(X1, X2)) → MARK(X1)
ACTIVE(U71(tt, M, N)) → MARK(U72(isNat(N), M, N))
MARK(U32(X)) → MARK(X)
MARK(U41(X1, X2)) → ACTIVE(U41(mark(X1), X2))
MARK(U51(X1, X2, X3)) → ACTIVE(U51(mark(X1), X2, X3))
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U52(X1, X2, X3)) → ACTIVE(U52(mark(X1), X2, X3))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
ACTIVE(isNat(x(V1, V2))) → MARK(U31(isNat(V1), V2))
MARK(U72(X1, X2, X3)) → ACTIVE(U72(mark(X1), X2, X3))
MARK(x(X1, X2)) → ACTIVE(x(mark(X1), mark(X2)))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(95) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04,JAR06].


The following pairs can be oriented strictly and are deleted.


MARK(U41(X1, X2)) → ACTIVE(U41(mark(X1), X2))
The remaining pairs can at least be oriented weakly.
Used ordering: Polynomial Order [NEGPOLO,POLO] with Interpretation:
POL( ACTIVE(x1) ) = max{0, -1}

POL( U11(x1, x2) ) = 2x1

POL( U31(x1, x2) ) = x1

POL( U41(x1, x2) ) = x2 + 1

POL( U51(x1, ..., x3) ) = 0

POL( U52(x1, ..., x3) ) = 0

POL( U72(x1, ..., x3) ) = 0

POL( x(x1, x2) ) = 0

POL( mark(x1) ) = x1

POL( active(x1) ) = x1

POL( tt ) = 0

POL( U12(x1) ) = x1

POL( isNat(x1) ) = 0

POL( U32(x1) ) = x1

POL( U21(x1) ) = 2x1

POL( s(x1) ) = 0

POL( plus(x1, x2) ) = x1

POL( U71(x1, ..., x3) ) = max{0, -1}

POL( 0 ) = 1

POL( U61(x1) ) = 1

POL( MARK(x1) ) = x1


The following usable rules [FROCOS05] with respect to the argument filtering of the ordering [JAR06] were oriented:

U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U12(active(X)) → U12(X)
U12(mark(X)) → U12(X)
U32(active(X)) → U32(X)
U32(mark(X)) → U32(X)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
U31(X1, mark(X2)) → U31(X1, X2)
U31(mark(X1), X2) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)

(96) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
ACTIVE(U31(tt, V2)) → MARK(U32(isNat(V2)))
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U51(tt, M, N)) → MARK(U52(isNat(N), M, N))
MARK(U21(X)) → MARK(X)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
MARK(U31(X1, X2)) → MARK(X1)
ACTIVE(U71(tt, M, N)) → MARK(U72(isNat(N), M, N))
MARK(U32(X)) → MARK(X)
MARK(U51(X1, X2, X3)) → ACTIVE(U51(mark(X1), X2, X3))
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U52(X1, X2, X3)) → ACTIVE(U52(mark(X1), X2, X3))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
ACTIVE(isNat(x(V1, V2))) → MARK(U31(isNat(V1), V2))
MARK(U72(X1, X2, X3)) → ACTIVE(U72(mark(X1), X2, X3))
MARK(x(X1, X2)) → ACTIVE(x(mark(X1), mark(X2)))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(97) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04,JAR06].


The following pairs can be oriented strictly and are deleted.


ACTIVE(U71(tt, M, N)) → MARK(U72(isNat(N), M, N))
The remaining pairs can at least be oriented weakly.
Used ordering: Polynomial Order [NEGPOLO,POLO] with Interpretation:
POL( ACTIVE(x1) ) = 2x1 + 2

POL( U11(x1, x2) ) = max{0, -2}

POL( U31(x1, x2) ) = 0

POL( U51(x1, ..., x3) ) = max{0, -1}

POL( U52(x1, ..., x3) ) = max{0, -1}

POL( U72(x1, ..., x3) ) = max{0, -1}

POL( x(x1, x2) ) = 0

POL( mark(x1) ) = x1 + 2

POL( active(x1) ) = max{0, x1 - 1}

POL( tt ) = 1

POL( U12(x1) ) = 2x1

POL( isNat(x1) ) = 0

POL( U32(x1) ) = 1

POL( U41(x1, x2) ) = 2x1

POL( U21(x1) ) = 2x1

POL( s(x1) ) = 1

POL( plus(x1, x2) ) = x2 + 1

POL( U71(x1, ..., x3) ) = max{0, 2x1 + 2x2 - 1}

POL( 0 ) = 0

POL( U61(x1) ) = x1 + 1

POL( MARK(x1) ) = 2


The following usable rules [FROCOS05] with respect to the argument filtering of the ordering [JAR06] were oriented:

U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
U31(X1, mark(X2)) → U31(X1, X2)
U31(mark(X1), X2) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
x(X1, mark(X2)) → x(X1, X2)
x(mark(X1), X2) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

(98) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
ACTIVE(U31(tt, V2)) → MARK(U32(isNat(V2)))
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U51(tt, M, N)) → MARK(U52(isNat(N), M, N))
MARK(U21(X)) → MARK(X)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
MARK(U31(X1, X2)) → MARK(X1)
MARK(U32(X)) → MARK(X)
MARK(U51(X1, X2, X3)) → ACTIVE(U51(mark(X1), X2, X3))
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U52(X1, X2, X3)) → ACTIVE(U52(mark(X1), X2, X3))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
ACTIVE(isNat(x(V1, V2))) → MARK(U31(isNat(V1), V2))
MARK(U72(X1, X2, X3)) → ACTIVE(U72(mark(X1), X2, X3))
MARK(x(X1, X2)) → ACTIVE(x(mark(X1), mark(X2)))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(99) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04,JAR06].


The following pairs can be oriented strictly and are deleted.


MARK(U52(X1, X2, X3)) → ACTIVE(U52(mark(X1), X2, X3))
MARK(x(X1, X2)) → ACTIVE(x(mark(X1), mark(X2)))
The remaining pairs can at least be oriented weakly.
Used ordering: Polynomial Order [NEGPOLO,POLO] with Interpretation:
POL( ACTIVE(x1) ) = 2x1

POL( U11(x1, x2) ) = 1

POL( U31(x1, x2) ) = 1

POL( U51(x1, ..., x3) ) = 1

POL( U52(x1, ..., x3) ) = max{0, -2}

POL( U72(x1, ..., x3) ) = 1

POL( x(x1, x2) ) = max{0, -2}

POL( mark(x1) ) = 2

POL( active(x1) ) = 0

POL( tt ) = 0

POL( U12(x1) ) = x1 + 2

POL( isNat(x1) ) = 1

POL( U32(x1) ) = 2

POL( U41(x1, x2) ) = max{0, x1 + x2 - 2}

POL( U21(x1) ) = x1 + 2

POL( s(x1) ) = x1 + 1

POL( plus(x1, x2) ) = 1

POL( U71(x1, ..., x3) ) = max{0, 2x1 + x3 - 2}

POL( 0 ) = 0

POL( U61(x1) ) = max{0, -2}

POL( MARK(x1) ) = 2


The following usable rules [FROCOS05] with respect to the argument filtering of the ordering [JAR06] were oriented:

U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
U31(X1, mark(X2)) → U31(X1, X2)
U31(mark(X1), X2) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(X1, mark(X2)) → x(X1, X2)
x(mark(X1), X2) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

(100) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
ACTIVE(U31(tt, V2)) → MARK(U32(isNat(V2)))
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U51(tt, M, N)) → MARK(U52(isNat(N), M, N))
MARK(U21(X)) → MARK(X)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
MARK(U31(X1, X2)) → MARK(X1)
MARK(U32(X)) → MARK(X)
MARK(U51(X1, X2, X3)) → ACTIVE(U51(mark(X1), X2, X3))
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
ACTIVE(isNat(x(V1, V2))) → MARK(U31(isNat(V1), V2))
MARK(U72(X1, X2, X3)) → ACTIVE(U72(mark(X1), X2, X3))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(101) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04,JAR06].


The following pairs can be oriented strictly and are deleted.


MARK(U72(X1, X2, X3)) → ACTIVE(U72(mark(X1), X2, X3))
The remaining pairs can at least be oriented weakly.
Used ordering: Polynomial Order [NEGPOLO,POLO] with Interpretation:
POL( ACTIVE(x1) ) = max{0, x1 - 1}

POL( U11(x1, x2) ) = 2x1

POL( U31(x1, x2) ) = x1

POL( U51(x1, ..., x3) ) = max{0, -1}

POL( U72(x1, ..., x3) ) = 1

POL( mark(x1) ) = x1

POL( active(x1) ) = x1

POL( tt ) = 0

POL( U12(x1) ) = 2x1

POL( isNat(x1) ) = 0

POL( U32(x1) ) = 2x1

POL( U41(x1, x2) ) = x1 + x2

POL( U21(x1) ) = 2x1

POL( U52(x1, ..., x3) ) = max{0, -2}

POL( s(x1) ) = max{0, -2}

POL( plus(x1, x2) ) = x1

POL( U71(x1, ..., x3) ) = 1

POL( x(x1, x2) ) = 1

POL( 0 ) = 0

POL( U61(x1) ) = max{0, -2}

POL( MARK(x1) ) = 2x1


The following usable rules [FROCOS05] with respect to the argument filtering of the ordering [JAR06] were oriented:

mark(U11(X1, X2)) → active(U11(mark(X1), X2))
active(U11(tt, V2)) → mark(U12(isNat(V2)))
mark(U12(X)) → active(U12(mark(X)))
active(U31(tt, V2)) → mark(U32(isNat(V2)))
mark(isNat(X)) → active(isNat(X))
active(U41(tt, N)) → mark(N)
mark(U21(X)) → active(U21(mark(X)))
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
mark(U32(X)) → active(U32(mark(X)))
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
mark(s(X)) → active(s(mark(X)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
active(plus(N, 0)) → mark(U41(isNat(N), N))
mark(U61(X)) → active(U61(mark(X)))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
active(x(N, 0)) → mark(U61(isNat(N)))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
mark(tt) → active(tt)
mark(0) → active(0)
U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U12(active(X)) → U12(X)
U12(mark(X)) → U12(X)
U32(active(X)) → U32(X)
U32(mark(X)) → U32(X)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
U31(X1, mark(X2)) → U31(X1, X2)
U31(mark(X1), X2) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U32(tt)) → mark(tt)
active(U61(tt)) → mark(0)
active(isNat(0)) → mark(tt)
plus(X1, mark(X2)) → plus(X1, X2)
plus(mark(X1), X2) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
s(active(X)) → s(X)
s(mark(X)) → s(X)
U41(X1, mark(X2)) → U41(X1, X2)
U41(mark(X1), X2) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(mark(X1), X2) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)
U61(active(X)) → U61(X)
U61(mark(X)) → U61(X)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)

(102) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
ACTIVE(U31(tt, V2)) → MARK(U32(isNat(V2)))
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U51(tt, M, N)) → MARK(U52(isNat(N), M, N))
MARK(U21(X)) → MARK(X)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
MARK(U31(X1, X2)) → MARK(X1)
MARK(U32(X)) → MARK(X)
MARK(U51(X1, X2, X3)) → ACTIVE(U51(mark(X1), X2, X3))
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
ACTIVE(isNat(x(V1, V2))) → MARK(U31(isNat(V1), V2))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(103) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04,JAR06].


The following pairs can be oriented strictly and are deleted.


MARK(U51(X1, X2, X3)) → ACTIVE(U51(mark(X1), X2, X3))
The remaining pairs can at least be oriented weakly.
Used ordering: Polynomial Order [NEGPOLO,POLO] with Interpretation:
POL( ACTIVE(x1) ) = max{0, -2}

POL( U11(x1, x2) ) = x1

POL( U31(x1, x2) ) = 2x1

POL( U51(x1, ..., x3) ) = x3 + 1

POL( mark(x1) ) = x1

POL( active(x1) ) = x1 + 2

POL( tt ) = 2

POL( U12(x1) ) = x1

POL( isNat(x1) ) = 0

POL( U32(x1) ) = x1

POL( U41(x1, x2) ) = 2x1 + x2

POL( U21(x1) ) = x1

POL( U52(x1, ..., x3) ) = 0

POL( s(x1) ) = max{0, x1 - 2}

POL( plus(x1, x2) ) = 2x1 + 2

POL( U71(x1, ..., x3) ) = 2

POL( U72(x1, ..., x3) ) = x1 + 2

POL( x(x1, x2) ) = 1

POL( 0 ) = 1

POL( U61(x1) ) = 0

POL( MARK(x1) ) = 2x1


The following usable rules [FROCOS05] with respect to the argument filtering of the ordering [JAR06] were oriented:

U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U12(active(X)) → U12(X)
U12(mark(X)) → U12(X)
U32(active(X)) → U32(X)
U32(mark(X)) → U32(X)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
U31(X1, mark(X2)) → U31(X1, X2)
U31(mark(X1), X2) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)

(104) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
ACTIVE(U31(tt, V2)) → MARK(U32(isNat(V2)))
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U51(tt, M, N)) → MARK(U52(isNat(N), M, N))
MARK(U21(X)) → MARK(X)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
MARK(U31(X1, X2)) → MARK(X1)
MARK(U32(X)) → MARK(X)
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
ACTIVE(isNat(x(V1, V2))) → MARK(U31(isNat(V1), V2))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(105) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04,JAR06].


The following pairs can be oriented strictly and are deleted.


ACTIVE(U51(tt, M, N)) → MARK(U52(isNat(N), M, N))
The remaining pairs can at least be oriented weakly.
Used ordering: Polynomial Order [NEGPOLO,POLO] with Interpretation:
POL( ACTIVE(x1) ) = max{0, 2x1 - 1}

POL( U11(x1, x2) ) = 1

POL( U31(x1, x2) ) = 1

POL( mark(x1) ) = 2

POL( active(x1) ) = x1 + 2

POL( tt ) = 2

POL( U12(x1) ) = 1

POL( isNat(x1) ) = 1

POL( U32(x1) ) = 2x1 + 2

POL( U41(x1, x2) ) = max{0, 2x1 + 2x2 - 1}

POL( U21(x1) ) = 2x1 + 1

POL( U51(x1, ..., x3) ) = 2x1 + 2

POL( U52(x1, ..., x3) ) = x1 + x3

POL( s(x1) ) = max{0, x1 - 2}

POL( plus(x1, x2) ) = max{0, 2x1 - 2}

POL( U71(x1, ..., x3) ) = 0

POL( U72(x1, ..., x3) ) = 2x1 + 2x2 + 2

POL( x(x1, x2) ) = 0

POL( 0 ) = 2

POL( U61(x1) ) = x1

POL( MARK(x1) ) = 1


The following usable rules [FROCOS05] with respect to the argument filtering of the ordering [JAR06] were oriented:

U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U31(X1, mark(X2)) → U31(X1, X2)
U31(mark(X1), X2) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)

(106) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
ACTIVE(U31(tt, V2)) → MARK(U32(isNat(V2)))
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U21(X)) → MARK(X)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
MARK(U31(X1, X2)) → MARK(X1)
MARK(U32(X)) → MARK(X)
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
ACTIVE(isNat(x(V1, V2))) → MARK(U31(isNat(V1), V2))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(107) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04,JAR06].


The following pairs can be oriented strictly and are deleted.


MARK(U31(X1, X2)) → MARK(X1)
MARK(U32(X)) → MARK(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Matrix interpretation [MATRO] with arctic natural numbers [ARCTIC]:

POL(MARK(x1)) = 3A + 1A·x1

POL(U11(x1, x2)) = 0A + 0A·x1 + 4A·x2

POL(ACTIVE(x1)) = 3A + 1A·x1

POL(mark(x1)) = -I + 0A·x1

POL(tt) = 3A

POL(U12(x1)) = 0A + 1A·x1

POL(isNat(x1)) = 1A + 3A·x1

POL(U31(x1, x2)) = 4A + 1A·x1 + 5A·x2

POL(U32(x1)) = 4A + 1A·x1

POL(U21(x1)) = 3A + 0A·x1

POL(plus(x1, x2)) = 0A + 0A·x1 + 1A·x2

POL(s(x1)) = 0A + 0A·x1

POL(x(x1, x2)) = 1A + 1A·x1 + 4A·x2

POL(active(x1)) = 0A + 0A·x1

POL(U41(x1, x2)) = 1A + -I·x1 + 0A·x2

POL(U51(x1, x2, x3)) = 1A + -I·x1 + 1A·x2 + 0A·x3

POL(U52(x1, x2, x3)) = 0A + -I·x1 + 1A·x2 + 0A·x3

POL(U71(x1, x2, x3)) = 3A + -I·x1 + 4A·x2 + 1A·x3

POL(U72(x1, x2, x3)) = 2A + -I·x1 + 4A·x2 + 1A·x3

POL(0) = 2A

POL(U61(x1)) = 3A + -I·x1

The following usable rules [FROCOS05] with respect to the argument filtering of the ordering [JAR06] were oriented:

mark(U11(X1, X2)) → active(U11(mark(X1), X2))
active(U11(tt, V2)) → mark(U12(isNat(V2)))
mark(U12(X)) → active(U12(mark(X)))
active(U31(tt, V2)) → mark(U32(isNat(V2)))
mark(isNat(X)) → active(isNat(X))
active(U41(tt, N)) → mark(N)
mark(U21(X)) → active(U21(mark(X)))
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
mark(U32(X)) → active(U32(mark(X)))
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
mark(s(X)) → active(s(mark(X)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
active(plus(N, 0)) → mark(U41(isNat(N), N))
mark(U61(X)) → active(U61(mark(X)))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
active(x(N, 0)) → mark(U61(isNat(N)))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
mark(tt) → active(tt)
mark(0) → active(0)
U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U12(active(X)) → U12(X)
U12(mark(X)) → U12(X)
U32(active(X)) → U32(X)
U32(mark(X)) → U32(X)
U31(X1, mark(X2)) → U31(X1, X2)
U31(mark(X1), X2) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U32(tt)) → mark(tt)
active(U61(tt)) → mark(0)
active(isNat(0)) → mark(tt)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
plus(X1, mark(X2)) → plus(X1, X2)
plus(mark(X1), X2) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
s(active(X)) → s(X)
s(mark(X)) → s(X)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
U41(X1, mark(X2)) → U41(X1, X2)
U41(mark(X1), X2) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(mark(X1), X2) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U61(active(X)) → U61(X)
U61(mark(X)) → U61(X)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)

(108) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
ACTIVE(U31(tt, V2)) → MARK(U32(isNat(V2)))
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U21(X)) → MARK(X)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
ACTIVE(isNat(x(V1, V2))) → MARK(U31(isNat(V1), V2))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(109) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04,JAR06].


The following pairs can be oriented strictly and are deleted.


ACTIVE(U31(tt, V2)) → MARK(U32(isNat(V2)))
The remaining pairs can at least be oriented weakly.
Used ordering: Matrix interpretation [MATRO] with arctic natural numbers [ARCTIC]:

POL(MARK(x1)) = 4A + 0A·x1

POL(U11(x1, x2)) = -I + 0A·x1 + 1A·x2

POL(ACTIVE(x1)) = 4A + 0A·x1

POL(mark(x1)) = -I + 0A·x1

POL(tt) = 4A

POL(U12(x1)) = -I + 0A·x1

POL(isNat(x1)) = -I + 0A·x1

POL(U31(x1, x2)) = -I + 2A·x1 + 5A·x2

POL(U32(x1)) = 5A + -I·x1

POL(U21(x1)) = -I + 0A·x1

POL(plus(x1, x2)) = 2A + 0A·x1 + 1A·x2

POL(s(x1)) = -I + 0A·x1

POL(x(x1, x2)) = -I + 2A·x1 + 5A·x2

POL(active(x1)) = -I + 0A·x1

POL(U41(x1, x2)) = 0A + -I·x1 + 0A·x2

POL(U51(x1, x2, x3)) = 1A + 0A·x1 + 1A·x2 + 0A·x3

POL(U52(x1, x2, x3)) = 2A + -I·x1 + 1A·x2 + 0A·x3

POL(U71(x1, x2, x3)) = -I + 4A·x1 + 5A·x2 + 2A·x3

POL(U72(x1, x2, x3)) = 3A + -I·x1 + 5A·x2 + 2A·x3

POL(0) = 4A

POL(U61(x1)) = 5A + -I·x1

The following usable rules [FROCOS05] with respect to the argument filtering of the ordering [JAR06] were oriented:

mark(U11(X1, X2)) → active(U11(mark(X1), X2))
active(U11(tt, V2)) → mark(U12(isNat(V2)))
mark(U12(X)) → active(U12(mark(X)))
active(U31(tt, V2)) → mark(U32(isNat(V2)))
mark(isNat(X)) → active(isNat(X))
active(U41(tt, N)) → mark(N)
mark(U21(X)) → active(U21(mark(X)))
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
mark(U32(X)) → active(U32(mark(X)))
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
mark(s(X)) → active(s(mark(X)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
active(plus(N, 0)) → mark(U41(isNat(N), N))
mark(U61(X)) → active(U61(mark(X)))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
active(x(N, 0)) → mark(U61(isNat(N)))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
mark(tt) → active(tt)
mark(0) → active(0)
U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U12(active(X)) → U12(X)
U12(mark(X)) → U12(X)
U32(active(X)) → U32(X)
U32(mark(X)) → U32(X)
U31(X1, mark(X2)) → U31(X1, X2)
U31(mark(X1), X2) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U32(tt)) → mark(tt)
active(U61(tt)) → mark(0)
active(isNat(0)) → mark(tt)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
plus(X1, mark(X2)) → plus(X1, X2)
plus(mark(X1), X2) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
s(active(X)) → s(X)
s(mark(X)) → s(X)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
U41(X1, mark(X2)) → U41(X1, X2)
U41(mark(X1), X2) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(mark(X1), X2) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U61(active(X)) → U61(X)
U61(mark(X)) → U61(X)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)

(110) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U21(X)) → MARK(X)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
ACTIVE(isNat(x(V1, V2))) → MARK(U31(isNat(V1), V2))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(111) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04,JAR06].


The following pairs can be oriented strictly and are deleted.


MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
The remaining pairs can at least be oriented weakly.
Used ordering: Polynomial Order [NEGPOLO,POLO] with Interpretation:
POL( ACTIVE(x1) ) = max{0, 2x1 - 2}

POL( U11(x1, x2) ) = 2

POL( U31(x1, x2) ) = 0

POL( mark(x1) ) = 2

POL( active(x1) ) = 2x1 + 2

POL( tt ) = 1

POL( U12(x1) ) = x1 + 2

POL( isNat(x1) ) = 2

POL( U32(x1) ) = 2x1 + 2

POL( U41(x1, x2) ) = x1 + 2x2 + 1

POL( U21(x1) ) = x1

POL( U51(x1, ..., x3) ) = 0

POL( U52(x1, ..., x3) ) = max{0, 2x1 + 2x2 - 1}

POL( s(x1) ) = max{0, x1 - 2}

POL( plus(x1, x2) ) = max{0, x1 - 2}

POL( U71(x1, ..., x3) ) = x1

POL( U72(x1, ..., x3) ) = 1

POL( x(x1, x2) ) = max{0, 2x2 - 2}

POL( 0 ) = 2

POL( U61(x1) ) = 0

POL( MARK(x1) ) = 2


The following usable rules [FROCOS05] with respect to the argument filtering of the ordering [JAR06] were oriented:

U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U31(X1, mark(X2)) → U31(X1, X2)
U31(mark(X1), X2) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)

(112) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
ACTIVE(isNat(x(V1, V2))) → MARK(U31(isNat(V1), V2))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(113) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04,JAR06].


The following pairs can be oriented strictly and are deleted.


ACTIVE(isNat(x(V1, V2))) → MARK(U31(isNat(V1), V2))
The remaining pairs can at least be oriented weakly.
Used ordering: Matrix interpretation [MATRO] with arctic natural numbers [ARCTIC]:

POL(MARK(x1)) = 3A + 3A·x1

POL(U11(x1, x2)) = -I + 0A·x1 + 2A·x2

POL(ACTIVE(x1)) = 3A + 3A·x1

POL(mark(x1)) = 0A + 0A·x1

POL(tt) = 0A

POL(U12(x1)) = -I + 0A·x1

POL(isNat(x1)) = -I + 0A·x1

POL(U21(x1)) = -I + 0A·x1

POL(plus(x1, x2)) = 2A + 0A·x1 + 2A·x2

POL(s(x1)) = 2A + 0A·x1

POL(x(x1, x2)) = 2A + 2A·x1 + -I·x2

POL(U31(x1, x2)) = 0A + -I·x1 + -I·x2

POL(active(x1)) = 0A + 0A·x1

POL(U32(x1)) = 0A + -I·x1

POL(U41(x1, x2)) = -I + 0A·x1 + 0A·x2

POL(U51(x1, x2, x3)) = 4A + 1A·x1 + 2A·x2 + 0A·x3

POL(U52(x1, x2, x3)) = 4A + 0A·x1 + 2A·x2 + 0A·x3

POL(U71(x1, x2, x3)) = 2A + -I·x1 + -I·x2 + 2A·x3

POL(U72(x1, x2, x3)) = 2A + 1A·x1 + -I·x2 + 2A·x3

POL(0) = 0A

POL(U61(x1)) = 2A + -I·x1

The following usable rules [FROCOS05] with respect to the argument filtering of the ordering [JAR06] were oriented:

mark(U11(X1, X2)) → active(U11(mark(X1), X2))
active(U11(tt, V2)) → mark(U12(isNat(V2)))
mark(U12(X)) → active(U12(mark(X)))
active(U31(tt, V2)) → mark(U32(isNat(V2)))
mark(isNat(X)) → active(isNat(X))
active(U41(tt, N)) → mark(N)
mark(U21(X)) → active(U21(mark(X)))
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
mark(U32(X)) → active(U32(mark(X)))
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
mark(s(X)) → active(s(mark(X)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
active(plus(N, 0)) → mark(U41(isNat(N), N))
mark(U61(X)) → active(U61(mark(X)))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
active(x(N, 0)) → mark(U61(isNat(N)))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
mark(tt) → active(tt)
mark(0) → active(0)
U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U12(active(X)) → U12(X)
U12(mark(X)) → U12(X)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
U31(X1, mark(X2)) → U31(X1, X2)
U31(mark(X1), X2) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U32(tt)) → mark(tt)
active(U61(tt)) → mark(0)
active(isNat(0)) → mark(tt)
U32(active(X)) → U32(X)
U32(mark(X)) → U32(X)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
plus(X1, mark(X2)) → plus(X1, X2)
plus(mark(X1), X2) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
s(active(X)) → s(X)
s(mark(X)) → s(X)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
U41(X1, mark(X2)) → U41(X1, X2)
U41(mark(X1), X2) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(mark(X1), X2) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U61(active(X)) → U61(X)
U61(mark(X)) → U61(X)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)

(114) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(115) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04,JAR06].


The following pairs can be oriented strictly and are deleted.


MARK(U12(X)) → MARK(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Matrix interpretation [MATRO] with arctic natural numbers [ARCTIC]:

POL(MARK(x1)) = 4A + 2A·x1

POL(U11(x1, x2)) = 4A + 0A·x1 + 1A·x2

POL(ACTIVE(x1)) = 5A + 2A·x1

POL(mark(x1)) = 4A + 0A·x1

POL(tt) = 5A

POL(U12(x1)) = 5A + 1A·x1

POL(isNat(x1)) = 3A + 0A·x1

POL(U21(x1)) = 5A + 0A·x1

POL(plus(x1, x2)) = 5A + 0A·x1 + 1A·x2

POL(s(x1)) = 5A + 0A·x1

POL(active(x1)) = 1A + 0A·x1

POL(U31(x1, x2)) = 4A + 0A·x1 + 1A·x2

POL(U32(x1)) = 5A + 0A·x1

POL(U41(x1, x2)) = 5A + 0A·x1 + 0A·x2

POL(U51(x1, x2, x3)) = 5A + 1A·x1 + 1A·x2 + 0A·x3

POL(U52(x1, x2, x3)) = 5A + -I·x1 + 1A·x2 + 0A·x3

POL(U71(x1, x2, x3)) = 5A + -I·x1 + 1A·x2 + 1A·x3

POL(U72(x1, x2, x3)) = 5A + -I·x1 + 1A·x2 + 1A·x3

POL(x(x1, x2)) = 5A + 1A·x1 + 1A·x2

POL(0) = 5A

POL(U61(x1)) = 5A + 0A·x1

The following usable rules [FROCOS05] with respect to the argument filtering of the ordering [JAR06] were oriented:

mark(U11(X1, X2)) → active(U11(mark(X1), X2))
active(U11(tt, V2)) → mark(U12(isNat(V2)))
mark(U12(X)) → active(U12(mark(X)))
active(U31(tt, V2)) → mark(U32(isNat(V2)))
mark(isNat(X)) → active(isNat(X))
active(U41(tt, N)) → mark(N)
mark(U21(X)) → active(U21(mark(X)))
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
mark(U32(X)) → active(U32(mark(X)))
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
mark(s(X)) → active(s(mark(X)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
active(plus(N, 0)) → mark(U41(isNat(N), N))
mark(U61(X)) → active(U61(mark(X)))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
active(x(N, 0)) → mark(U61(isNat(N)))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
mark(tt) → active(tt)
mark(0) → active(0)
U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U12(active(X)) → U12(X)
U12(mark(X)) → U12(X)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U32(tt)) → mark(tt)
active(U61(tt)) → mark(0)
active(isNat(0)) → mark(tt)
U32(active(X)) → U32(X)
U32(mark(X)) → U32(X)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
U31(X1, mark(X2)) → U31(X1, X2)
U31(mark(X1), X2) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(mark(X1), X2) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
s(active(X)) → s(X)
s(mark(X)) → s(X)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
U41(X1, mark(X2)) → U41(X1, X2)
U41(mark(X1), X2) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(mark(X1), X2) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U61(active(X)) → U61(X)
U61(mark(X)) → U61(X)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)

(116) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(117) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04,JAR06].


The following pairs can be oriented strictly and are deleted.


ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
The remaining pairs can at least be oriented weakly.
Used ordering: Matrix interpretation [MATRO] with arctic natural numbers [ARCTIC]:

POL(MARK(x1)) = 4A + 2A·x1

POL(U11(x1, x2)) = 3A + 0A·x1 + -I·x2

POL(ACTIVE(x1)) = 5A + 0A·x1

POL(mark(x1)) = 5A + 0A·x1

POL(tt) = 3A

POL(U12(x1)) = 2A + -I·x1

POL(isNat(x1)) = 3A + -I·x1

POL(U21(x1)) = 3A + 0A·x1

POL(plus(x1, x2)) = 4A + 0A·x1 + -I·x2

POL(s(x1)) = 4A + -I·x1

POL(active(x1)) = 5A + 0A·x1

POL(U31(x1, x2)) = 5A + -I·x1 + -I·x2

POL(U32(x1)) = 5A + -I·x1

POL(U41(x1, x2)) = 5A + -I·x1 + 0A·x2

POL(U51(x1, x2, x3)) = 4A + -I·x1 + -I·x2 + 0A·x3

POL(U52(x1, x2, x3)) = 5A + 0A·x1 + -I·x2 + 0A·x3

POL(U71(x1, x2, x3)) = -I + -I·x1 + -I·x2 + 0A·x3

POL(U72(x1, x2, x3)) = 4A + 0A·x1 + -I·x2 + 0A·x3

POL(x(x1, x2)) = 1A + 0A·x1 + -I·x2

POL(0) = 0A

POL(U61(x1)) = 0A + -I·x1

The following usable rules [FROCOS05] with respect to the argument filtering of the ordering [JAR06] were oriented:

mark(U11(X1, X2)) → active(U11(mark(X1), X2))
active(U11(tt, V2)) → mark(U12(isNat(V2)))
mark(U12(X)) → active(U12(mark(X)))
active(U31(tt, V2)) → mark(U32(isNat(V2)))
mark(isNat(X)) → active(isNat(X))
active(U41(tt, N)) → mark(N)
mark(U21(X)) → active(U21(mark(X)))
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
mark(U32(X)) → active(U32(mark(X)))
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
mark(s(X)) → active(s(mark(X)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
active(plus(N, 0)) → mark(U41(isNat(N), N))
mark(U61(X)) → active(U61(mark(X)))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
active(x(N, 0)) → mark(U61(isNat(N)))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
mark(tt) → active(tt)
mark(0) → active(0)
U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U12(active(X)) → U12(X)
U12(mark(X)) → U12(X)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U32(tt)) → mark(tt)
active(U61(tt)) → mark(0)
active(isNat(0)) → mark(tt)
U32(active(X)) → U32(X)
U32(mark(X)) → U32(X)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
U31(X1, mark(X2)) → U31(X1, X2)
U31(mark(X1), X2) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(mark(X1), X2) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
s(active(X)) → s(X)
s(mark(X)) → s(X)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
U41(X1, mark(X2)) → U41(X1, X2)
U41(mark(X1), X2) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(mark(X1), X2) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U61(active(X)) → U61(X)
U61(mark(X)) → U61(X)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)

(118) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
MARK(U11(X1, X2)) → MARK(X1)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(119) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04,JAR06].


The following pairs can be oriented strictly and are deleted.


MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
The remaining pairs can at least be oriented weakly.
Used ordering: Polynomial Order [NEGPOLO,POLO] with Interpretation:
POL( ACTIVE(x1) ) = max{0, 2x1 - 2}

POL( U11(x1, x2) ) = max{0, -1}

POL( mark(x1) ) = 2x1 + 1

POL( active(x1) ) = x1

POL( tt ) = 0

POL( U12(x1) ) = 2x1

POL( isNat(x1) ) = 2

POL( U31(x1, x2) ) = x1 + x2 + 1

POL( U32(x1) ) = 2

POL( U41(x1, x2) ) = max{0, x2 - 1}

POL( U21(x1) ) = 1

POL( U51(x1, ..., x3) ) = 0

POL( U52(x1, ..., x3) ) = 0

POL( s(x1) ) = max{0, 2x1 - 2}

POL( plus(x1, x2) ) = max{0, x1 - 2}

POL( U71(x1, ..., x3) ) = 0

POL( U72(x1, ..., x3) ) = max{0, -1}

POL( x(x1, x2) ) = max{0, -2}

POL( 0 ) = 0

POL( U61(x1) ) = 2

POL( MARK(x1) ) = 2


The following usable rules [FROCOS05] with respect to the argument filtering of the ordering [JAR06] were oriented:

U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)

(120) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → MARK(X1)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(121) UsableRulesProof (EQUIVALENT transformation)

We can use the usable rules and reduction pair processor [LPAR04] with the Ce-compatible extension of the polynomial order that maps every function symbol to the sum of its arguments. Then, we can delete all non-usable rules [FROCOS05] from R.

(122) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → MARK(X1)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))

The TRS R consists of the following rules:

isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(123) UsableRulesReductionPairsProof (EQUIVALENT transformation)

By using the usable rules with reduction pair processor [LPAR04] with a polynomial ordering [POLO], all dependency pairs and the corresponding usable rules [FROCOS05] can be oriented non-strictly. All non-usable rules are removed, and those dependency pairs and usable rules that have been oriented strictly or contain non-usable symbols in their left-hand side are removed as well.

The following dependency pairs can be deleted:

ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
The following rules are removed from R:

isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
Used ordering: POLO with Polynomial interpretation [POLO]:

POL(ACTIVE(x1)) = 2 + x1   
POL(MARK(x1)) = 2 + x1   
POL(U11(x1, x2)) = 2·x1 + 2·x2   
POL(U21(x1)) = x1   
POL(active(x1)) = x1   
POL(isNat(x1)) = 2·x1   
POL(mark(x1)) = x1   
POL(plus(x1, x2)) = 1 + 2·x1 + 2·x2   
POL(s(x1)) = 2·x1   

(124) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → MARK(X1)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U21(X)) → MARK(X)

R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(125) DependencyGraphProof (EQUIVALENT transformation)

The approximation of the Dependency Graph [LPAR04,FROCOS05,EDGSTAR] contains 1 SCC with 1 less node.

(126) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U21(X)) → MARK(X)
MARK(U11(X1, X2)) → MARK(X1)

R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(127) QDPSizeChangeProof (EQUIVALENT transformation)

By using the subterm criterion [SUBTERM_CRITERION] together with the size-change analysis [AAECC05] we have proven that there are no infinite chains for this DP problem.

From the DPs we obtained the following set of size-change graphs:

  • MARK(U21(X)) → MARK(X)
    The graph contains the following edges 1 > 1

  • MARK(U11(X1, X2)) → MARK(X1)
    The graph contains the following edges 1 > 1

(128) YES